{"product_id":"lowpro-powertray-4runner-fj-cruiser-gx","title":"LowPro Powertray For 4Runner\/ FJ Cruiser\/ GX","description":"\u003ch4 style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\n\u003cstrong\u003e \u003cspan style=\"color: #ff2a00;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003eIntroducing the New LowPro Powertray.\u003c\/strong\u003e For this Powertray the fender-side bend gets reversed. So with this design, the two M8 fender bolts can be easily accessed right above the surface of the tray. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWhats the difference between the new LowPro Powertray and the original Powertray design?\u003c\/strong\u003e Short answer, surface area and hood clearance.\u003c\/p\u003e\n\u003cp\u003eThe LowPro trays mount about 1.5 inches lower in the engine compartment due to reversing the fender-side bend. This causes some interference with the OE wiring harnesses that come out of the master cylinder. The original Powertray design simply installs overtop those harnesses, so it can be made wider. Also, since the LowPro mounts lower, it provides increased clearance between the surface of the tray to the underside of the hood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho would the LowPro Powertray work best for?\u003c\/strong\u003e The LowPro Powertray works best for applications where increased hood clearance is needed; Or for people who have a more minimalistic vision and don't plan on having more than a couple accessories to power.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOne more thing to consider... Is how often you'll be wiring things up over the course of the builds life. The LowPro Powertray sits at about the same height as the factory fuse block lid when installed. This flush aesthetic adds a great visual appeal but also makes it kinda difficult run wires; whereas, the original Powertray design mounts higher up and allows more room to get a hand between the surface of the tray and factory fuse block (lid removed). Having extra height and easier access makes it far more convenient to wire up things when you’re adding sweet mods to your rig. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct includes: \u003c\/strong\u003eThe LowPro PowerTray, Support Leg, and Mounting Hardware.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/\/8a-umrMY158\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cdiv class=\"\"\u003eCheck out how Wasting Time In The Woods used this tray to install a SmittyBilt Compressor in his GX460.\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e - Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterjet manufacturing\u003c\/strong\u003e - Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfered edges\u003c\/strong\u003e - This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Fit\u003c\/strong\u003e - PowerTrays install without the need to modify anything on your rig. 100% bolt in installation. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnparalleled stability\u003c\/strong\u003e - Utilizing four points of contact, you can be sure that your valuable electronics are safe and secure. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Quality Mounting Hardware\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Since the mounting hardware on this design is more pronounced, we supply high quality stainless steel mounting hardware that combines both form and function to achieve a product that is as strong as it is beautiful.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Made Easy \u003c\/strong\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eThis PowerTray will fit the following vehicles:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eToyota FJ cruiser 07-14 with\u003cspan\u003e \u003c\/span\u003e\u003cu\u003eAutomatic Transmission\u003c\/u\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eUnfortunately manual transmission FJ's have a clutch fluid reservoir mounted in the same location the PowerTray is designed to install. So if your FJ has a manual transmission then shoot us an email with pictures of the reservoir and please include vehicle info like year, make, and model so we can go over options for relocating the reservoir. \u003cspan\u003e \u003c\/span\u003e\u003ca href=\"mailto:Sale@Powertrays.com\" data-mce-href=\"mailto:Sale@Powertrays.com\"\u003eSales@Powertrays.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: FJ cruiser's with the rear 400w inverter may have a small relay box bolted to the fender that will need trimmed. CLICK HERE for pic of bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eToyota 5th gen 4Runner's 09-Current\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: 2020+ 4runners have an additional relay\/fuse box located on the fender that will need to be relocated closer to the cab of the vehicle in order to install this Powertray. CLICK HERE to see the process.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eToyota 4th gen 4Runner's 02-09\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eNote: Some 4Runner's may have a little bracket that holds a small wiring harness bolted to one of the M8 threaded holes located on the inner fender. The top of this bracket will need to be cut off in order to install this Low-pro PowerTay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eLexus GX470 02-09 and GX460 10-Current\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: These vehicles may have a plastic vanity cover that will need to be removed and discarded. But nothing should actually hinder installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*If you see something say something! If you notice any inaccurate info above let us know so we can update it.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"mailto:Sales@PowerTrays.com\" data-mce-href=\"mailto:Sales@PowerTrays.com\"\u003eSales@PowerTrays.com\u003c\/a\u003e\u003c\/p\u003e\n\u003cstyle\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e","brand":"PowerTrays","offers":[{"title":"Raw Aluminum","offer_id":50473064268098,"sku":"12032","price":102.0,"currency_code":"USD","in_stock":true},{"title":"Black Powder Coat","offer_id":50473064300866,"sku":"12033","price":102.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/9117\/2418\/files\/20250227_133406-1.jpg?v=1779210956","url":"https:\/\/sibibuiltoffroad.com\/products\/lowpro-powertray-4runner-fj-cruiser-gx","provider":"Sibi Built Offroad","version":"1.0","type":"link"}