Full replacement lower fill plate for the Tacoma Headlights.  Color matched with automotive grade paint and clear coat. Comes with plates for both left and right side replacements.

From the factory, Toyota designed a void in the lower section of the headlight that has zero purpose. They covered this up with a non functional "finned" style plate that is hard to clean(basically a bug catcher) and does not match anything else around it.

So I came up with an idea for a color matched, "smooth" trim piece replacement. It's a very basic idea, but changes the look of the front and accentuates the headlight lines...making it look more aggressive. Plus, it is a lot easier to clean being smooth. The OEM trim plate was 3D scanned and modified for a 100% direct swap and OEM fitment. Then, they are Injection molded out of durable ABS that will last the life of the truck.

Installation is very simple, 2 Phillips screws on each light and they can be swapped over. Unfortunately, the front bumper is tucked over them... so it will need to be removed for installation.

Fits:

2016+ Toyota Tacomas, all models

Replace the interior chrome rings around your center console cup holder, push start button, shift boot, and 4WD selector with a new styled drop in trim kit. We offer some factory color matched options to remove the OEM chrome interior pieces and balance the style of your interior to the outside of your vehicle. No modifications to your existing Tacoma are necessary, simply pop out your old trim pieces using a soft plastic tool and put our kit in its place.

Fits:

2016+ Toyota Tacoma Automatic Models

The interior vent ring kit replaces the stock chrome bezels around your dash air vents. They come in a 4 pack and snap into the existing mounting slots. We've designed all rings to be identical and fit in any vent locations on the dash, simply double check the back for indications of which rotation to install into your dash. A subtle but clean upgrade removing the sun reflecting chrome rings around your AC vents. Available in a variety of factory matched colors (matches exterior paint.) 

Please note that the rings installed into the drivers side vents will fit slightly different than the passenger side as the OEM vents were designed to point toward the driver.

FITS:

2016+ Tacoma

2 Piece Billet 6061-T6 Aluminum Shift Knob. Precision CNC machined in the USA. Durable matte black anodized finish. Exposed stainless steel or anodized aluminum socket head cap screws for a bold industrial look. Engineered to be ergonomic. Easy installation, requires small flat screwdriver or pry tool (not included) and T-9 torx key (included). 

Compatibility:

• 2025+ RAM with dash mounted dial shifter.
• Will not fit 2019-2024 RAM
  

Instruction video:

Elevate the look of your Tacoma with our Aftermarket Pro Grille Letters, specifically designed for the 2016-2023 models. This convenient kit allows you to easily swap out your current letters, offering a quick and stylish way to change the color of your grille lettering without the need to purchase an entirely new grille.

Choose from four vibrant colors to customize your Tacoma's appearance to match your style. Each letter is designed to screw in individually, ensuring a secure fit. Please note that these letters are compatible with grilles that feature four screws for installation.

THESE DO NOT FIT 2024 TOYOTA TACOMA OR ANY OTHER VEHICLE BESIDES 2016-2023 TOYOTA TACOMA. THIS ITEM IS FINAL SALE.

Features

• Customizable Appearance: Easily change the color of your grille letters with four color options available.
• Individual Installation: Each letter screws in individually for a secure and straightforward installation process.
• Designed for Aftermarket Grilles: Specifically made to fit our aftermarket grille; fitment with other brands is not guaranteed.
• Complete Set: Includes all six letters necessary for a complete grille upgrade.

Important Note: No refunds can be given for this product due to fitment limitations with other brands.

Disclaimer: This product is designed to be compatible with Toyota Tacoma. Aspire Auto Accessories is an independent aftermarket brand and is not affiliated with, sponsored by, or endorsed by Toyota Motor Corporation. Toyota®, Tacoma®, 4Runner®, Tundra®, and TRD® are registered trademarks of Toyota Motor Corporation, and any mention is for fitment or compatibility purposes only.

Now is the time to replace your stock mirrors on your 2016-2025 Tacoma, 2014-2025 4Runner, and 2019-2025 Rav4. These upgraded wide view side mirrors widen your field of view and helps you see much more and helps with blind spots much more than the stock mirrors that come with your Tacoma, 4Runner and Rav4. These are perfect for daytime and nighttime driving. These mirrors include everything you need to replace your stock mirrors and come with a pair - for both sides of the vehicle; driver and passenger.

Features

• Quick easy installation
• Wider field of view compared to stock
• Includes passenger and driver side mirror
• Choose from original colored mirrors or blue tint (helps reduce headlight glare)

Notes

• All mirrors come standard with the heating feature, if you do not have heating mirrors, still select this option. If you do not have heating mirrors you will not need to connect to the connections for the feature.
• If you have turn signals on your mirror you can tap into the existing wiring for the sequential turn signal built into the mirror with our plug and play setup.
• If your truck has blind spot monitoring you can connect to the blind spot monitoring system from the factory or your own aftermarket blind monitoring solution.

Disclaimer: This product is designed to be compatible with Toyota 4Runner, Tacoma, Rav4. Aspire Auto Accessories is an independent aftermarket brand and is not affiliated with, sponsored by, or endorsed by Toyota Motor Corporation. Toyota®, Tacoma®, 4Runner®, Tundra®, and TRD® are registered trademarks of Toyota Motor Corporation, and any mention is for fitment or compatibility purposes only.

2022-Current (3rd Gen) Toyota Tundra Fender Flare Kit. (Estimated Lead Time 8-14 Weeks.)

Our 2022-Current Toyota Tundra Fender Flare Kit is about 2.5 inches wide. It is designed to provide extra protection to your vehicle’s body panels from the dirt and rocks picked up by wider and taller off-road tires.

The kit is available in high-quality automotive grade injection molded polyurethane finished in black primer (matte) which can be painted over or can be used as is. It is also available in high-quality carbon fiber with either a gloss or a matte top coat finish.sh.

The Fender Flare Kit does not require any drilling or trimming of the OEM parts on the car.

The Fender Flares are held on by 3M™ Super Strength Molding Tape, as well as the OEM bolts in the wheel wells. It is a simple installation, without the need to modify any OEM body panels, other than the removal of the OEM fender flares.

Installation Guide

The vehicle’s surface needs to be thoroughly cleaned with alcohol before the installation to ensure a proper bond with the 3M™ tape.

We recommend applying adhesion promoter on the back side of the flares before installing the 3M™ tape to help with better adhesion. Apply double layers of the 3M™ tape for the best result. Optimal surface temperature for the 3M™ Super Strength Molding Tape is above 65°F (18°C).

The MESO Stealth shift knob. What is it? Basically, it's a TRD PRO style replacement shift knob....but with a twist.  As you may notice, there are 2 wires coming out of the bottom which are connected to left and right activation buttons hidden on each side of the shift knob.

What do the shift knob buttons do exactly? On all 2016-up Tacoma's, there is a factory button on the lower dash labeled ECT. (Electronically Controlled Transmission). When that button is pressed, the truck drives/shifts more responsive. Almost like an overdrive.

This is where the stealth knob comes in handy. It relocates the ECT button to be at the palm of your hand making the ECT mode much more convenient to activate. This also frees up a spot on the dash(where the original button was) so an aftermarket switch/button can be installed if needed.

The Stealth shift knob comes with all the wire/extensions needed for a plug and play install. Screw the knob on, run the extension up to the lower dash, unplug the OEM ECT connector, and plug it into the provided harness. You can use either left or right side button for the ECT control. The other unused button is ready for any additional accessory that you want to activate. Customers have used it for garage door openers, light bars, aux lights, etc.

The kit now comes with both RED and BLACK buttons. So you can choose the color you want.

Fits 3rd Gen only 

Automatic Models Only

WARNING:

The auxiliary wire in this kit is only intended to support currents under 1 Amp. DO NOT send more than 1 Amp through this kit. The best use of this kit is to replace a small surface mount button on some devices, or to trigger a relay.

Upgrade your Toyota Tacoma with our new Steering Wheel Blackout Surround! Our injection molded surround replaces silver factory versions for a bold, stylish look. Add some extra attitude to your driving experience with this easy to install Tacoma feature. Dare to be different!

Tacoma   2012 - 2023

Tundra   2014 - 2021

4Runner   2014 - 2023

Comes with 4 button blanks in case you have a different trim levels

 INSTALL GUIDE

The V2's have landed!

Finally a key fob that retains your spare key. Introducing the Minimalist V2. Same footprint as the original, but now has a slot in the back for the spare key. Spring loaded latch keeps it locked in, and easy to remove. Metal insert that still works as a bottle opener. Available in 16 colors. Injection molded for OEM fit, finish, and durability.

-2016+ TACOMA(smart key only)

-2020-21 TUNDRA (smart key)

-2020-2021 4 RUNNER(smart key) 2022 FOB WILL NOT FIT

Now is the time to replace your stock mirrors on your 2024-2026 Tacoma. These upgraded wide view side mirrors widen your field of view and helps you see much more and helps with blind spots much more than the stock mirrors that come with your Tacoma. These are perfect for daytime and nighttime driving. These mirrors include everything you need to replace your stock mirrors and come with a pair - for both sides of the vehicle; driver and passenger.

Features

• Quick easy installation
• Wider field of view compared to stock
• Includes passenger and driver side mirror
• Choose from original colored mirrors or blue tint (helps reduce headlight glare)

Notes

• All mirrors come standard with the heating feature, if you do not have heating mirrors, still select this option. If you do not have heating mirrors you will not need to connect to the connections for the feature.
• If you have turn signals on your mirror you can tap into the existing wiring for the sequential turn signal built into the mirror with our plug and play setup.
• If your truck has blind spot monitoring you can connect to the blind spot monitoring system from the factory or your own aftermarket blind monitoring solution.

This video demonstrates our mirrors on a 3rd gen Tacoma. The 3rd gen Tacoma installation is extremely similar.

This product is designed to be compatible with Toyota Tacoma (2024-2025).

Sold as a set with four flare-pieces. Does not fit the TRD Pro/Trailhunter trims.

Our 2024-Current Toyota Tacoma Fender Flare Kit adds 1 inch per corner on TRD PreRunner/Sport/Off-road and Limited trims, and 1.5 inches on SR and SR5 trims. It is designed to provide extra protection to your vehicle’s body panels from the dirt and rocks picked up by wider and taller off-road tires.

The Fender Flare Kit features an OEM+ style design, with the front flares featuring a high clearance design and aero stabilizing fins.

The kit is available in high-quality automotive grade fiber-reinforced plastic in black primer (matte) which can be painted over or can be used as is. It is also available in high-quality carbon fiber with either a gloss or a matte top coat finish.

The Fender Flare Kit does not require any drilling or trimming of the OEM parts on the car.

The Fender Flares are held on by 3M™ Super Strength Molding Tape, as well as the OEM bolts in the wheel wells. It is a simple installation, without the need to modify any OEM body panels, other than the removal of the OEM fender flares if equipped.

In order to install on SR and SR5 models, you will need to purchase 14 of the OEM 10mm wheel opening molding screw for the rear flares (Toyota Part Number 90159-A0053).

The vehicle’s surface needs to be thoroughly cleaned with alcohol before the installation to ensure a proper bond with the 3M™ tape.

We recommend applying adhesion promoter on the back side of the flares before installing the 3M™ tape to help with better adhesion. Apply double layers of the 3M™ tape for the best result. Optimal surface temperature for the 3M™ Super Strength Molding Tape is above 65°F (18°C).

Sold as a set with six flare-pieces. Does not fit the Limited trim.

Our Toyota 4Runner Fender Flare Kit adds 1.5 inches per corner. It is designed to provide extra protection to your vehicle’s body panels from the dirt and rocks picked up by wider and taller off-road tires.

The Fender Flare Kit features an OEM+ style design, with the front flares featuring a high clearance design that works perfectly with a viper cut.

The kit is available in high-quality automotive grade fiber-reinforced plastic in black primer (matte) which can be painted over or can be used as is. It is also available in high-quality carbon fiber with either a gloss or a matte top coat finish.

The Fender Flare Kit does not require any drilling or trimming of the OEM parts on the car.

The Fender Flares are held on by 3M™ Super Strength Molding Tape, as well as the OEM bolts in the wheel wells. It is a simple installation, without the need to modify any OEM body panels, other than the removal of the OEM fender flares if equipped.

The vehicle’s surface needs to be thoroughly cleaned with alcohol before the installation to ensure a proper bond with the 3M™ tape.

We recommend applying adhesion promoter on the back side of the flares before installing the 3M™ tape to help with better adhesion. Apply double layers of the 3M™ tape for the best result. Optimal surface temperature for the 3M™ Super Strength Molding Tape is above 65°F (18°C).

Sold as a set with six flare-pieces. Fits all trims.

Our 2024-Current Toyota Land Cruiser Fender Flare Kit adds 1.5 inches per corner on Land Cruiser and First Edition trims, and 2 inches on 1958 trim. It is designed to provide extra protection to your vehicle’s body panels from the dirt and rocks picked up by wider and taller off-road tires.

The Fender Flare Kit features an OEM+ style design, and is available in high-quality automotive grade fiber-reinforced plastic in black primer (matte) which can be painted over or can be used as is. It is also available in high-quality carbon fiber with either a gloss or a matte top coat finish.

The Fender Flare Kit does not require any drilling or trimming of the OEM parts on the car.

The Fender Flares are held on by 3M™ Super Strength Molding Tape, as well as the OEM bolts and clips in the wheel wells. It is a simple bolt-on replacement, without the need to modify any OEM body panels.

The vehicle’s surface needs to be thoroughly cleaned with alcohol before the installation to ensure a proper bond with the 3M™ tape.

We recommend applying adhesion promoter on the back side of the flares before installing the 3M™ tape to help with better adhesion. Apply double layers of the 3M™ tape for the best result. Optimal surface temperature for the 3M™ Super Strength Molding Tape is above 65°F (18°C).

Sold as a set with six flare-pieces. Fits all trim levels.

Our 2023-Current Toyota Sequoia Fender Flare Kit is about 2.5 inches wide. It is designed to provide extra protection to your vehicle’s body panels from the dirt and rocks picked up by wider and taller off-road tires.

The kit is available in high-quality automotive grade fiber-reinforced plastic in black primer (matte) which can be painted over or can be used as is. It is also available in high-quality carbon fiber with either a gloss or a matte top coat finish.

The Fender Flare Kit does not require any drilling or trimming of the OEM parts on the car.

The Fender Flares are held on by 3M™ Super Strength Molding Tape, as well as the OEM bolts in the wheel wells. It is a simple installation, without the need to modify any OEM body panels, other than the removal of the OEM fender flares.

The vehicle’s surface needs to be thoroughly cleaned with alcohol before the installation to ensure a proper bond with the 3M™ tape.

We recommend applying adhesion promoter on the back side of the flares before installing the 3M™ tape to help with better adhesion. Apply double layers of the 3M™ tape for the best result. Optimal surface temperature for the 3M™ Super Strength Molding Tape is above 65°F (18°C).

Sold as a set with six flare-pieces. Fits all trim levels.

Our GX460/Prado Fender Flare Kit is about 1.5 inches wide. It is designed to protect your vehicle's body panels from the dirt and rocks picked up by wider and taller off-road tires. 

The kit is made with high-quality automotive grade injection molded polyurethane finished in satin black paint that is UV and scratch resistant. An optional black primer finish is available for those who are going to paint the fender flares to match their vehicle's paint color. We recommend sanding the primer with 1,000-2,000 grit sandpaper before painting.

The Fender Flare Kit does not require any modifications or trimming of the OEM parts on the car.

The Fender Flares are held on by 3M™ Super Strength Molding Tape. It is a simple installation, without the need to remove any OEM body panels.

The vehicle's surface needs to be thoroughly cleaned with alcohol before the installation to ensure a proper bond with the 3M™ tape.

We recommend power sanding the back side of the fender flares with 200 grit sandpaper and then applying adhesion promoter before installing two layers of the 3M™ tape for the best result. Optimal surface temperature for the 3M™ Super Strength Molding Tape is above 65°F (18°C).

The polyurethane material can be heat formed to fit better to the body panels.

Silicone caulking is also recommended for longevity and weatherproofing.

Sold as a set with four flare-pieces. Fits all trims.

Our 2016-2023 Toyota Tacoma Fender Flare Kit adds 1.5-2 inches per corner. It is designed to provide extra protection to your vehicle’s body panels from the dirt and rocks picked up by wider and taller off-road tires.

The kit is available in high-quality automotive grade fiber-reinforced plastic in black primer (matte) which can be painted over or can be used as is. It is also available in high-quality carbon fiber with either a gloss or a matte top coat finish.

The Fender Flare Kit does not require any drilling or trimming of the OEM parts on the car.

The Fender Flares are held on by 3M™ Super Strength Molding Tape, as well as the OEM bolts in the wheel wells. It is a simple installation, without the need to modify any OEM body panels, other than the removal of the OEM fender flares if equipped.

In order to install on SR models, you may need to purchase some OEM 10mm wheel opening molding screw (Toyota Part Number 90159-A0053), in order to install the flares.

The vehicle’s surface needs to be thoroughly cleaned with alcohol before the installation to ensure a proper bond with the 3M™ tape.

We recommend applying adhesion promoter on the back side of the flares before installing the 3M™ tape to help with better adhesion. Apply double layers of the 3M™ tape for the best result. Optimal surface temperature for the 3M™ Super Strength Molding Tape is above 65°F (18°C).

Sold as a set with four flare-pieces. Fits all trim levels.

Our 2022-Current Toyota Tundra Fender Flare Kit is about 2.5 inches wide. It is designed to provide extra protection to your vehicle's body panels from the dirt and rocks picked up by wider and taller off-road tires. 

The kit is available in high-quality automotive grade fiber-reinforced plastic in black primer (matte) which can be painted over or can be used as is. It is also available in high-quality carbon fiber with either a gloss or a matte top coat finish.

A forged carbon fiber version in gloss is available at customer request (made to order, estimated lead time 8-14 weeks).

The Fender Flare Kit does not require any drilling or trimming of the OEM parts on the car.

The Fender Flares are held on by 3M™ Super Strength Molding Tape, as well as the OEM bolts in the wheel wells. It is a simple installation, without the need to modify any OEM body panels, other than the removal of the OEM fender flares.

In order to install on SR models, you may need to purchase some OEM 10mm wheel opening molding screw (Toyota Part Number 90159-A0053), in order to install the flares.

The vehicle's surface needs to be thoroughly cleaned with alcohol before the installation to ensure a proper bond with the 3M™ tape.

We recommend applying adhesion promoter on the back side of the flares before installing the 3M™ tape to help with better adhesion. Apply double layers of the 3M™ tape for the best result. Optimal surface temperature for the 3M™ Super Strength Molding Tape is above 65°F (18°C).

Sold as a set with six flare-pieces. Does not fit the TRD Pro/Trailhunter trims.

2025-Current (6th Gen) Toyota 4Runner Fender Flare Kit adds 1 inch per corner. It is designed to provide extra protection to your vehicle’s body panels from the dirt and rocks picked up by wider and taller off-road tires.

The Fender Flare Kit features an OEM+ style design, with the front flares featuring a high clearance design and aero stabilizing fins.

The kit is available in high-quality automotive grade fiber-reinforced plastic in black primer (matte) which can be painted over or can be used as is. It is also available in high-quality carbon fiber with either a gloss or a matte top coat finish.

The Fender Flare Kit does not require any drilling or trimming of the OEM parts on the car.

The Fender Flares are held on by 3M™ Super Strength Molding Tape, as well as the OEM bolts in the wheel wells. It is a simple installation, without the need to modify any OEM body panels, other than the removal of the OEM fender flares if equipped.

The vehicle’s surface needs to be thoroughly cleaned with alcohol before the installation to ensure a proper bond with the 3M™ tape.

We recommend applying adhesion promoter on the back side of the flares before installing the 3M™ tape to help with better adhesion. Apply double layers of the 3M™ tape for the best result. Optimal surface temperature for the 3M™ Super Strength Molding Tape is above 65°F (18°C).

Sold as a set with six flare-pieces. Fits all trims.

Our 2024-Current Lexus GX550 Fender Flare Kit adds 1 inch per corner on Overtrail trim, and 1.5 inches on Premium and Luxury trims. It is designed to provide extra protection to your vehicle’s body panels from the dirt and rocks picked up by wider and taller off-road tires.

The Fender Flare Kit features an OEM+ style design, and is available in high-quality automotive grade fiber-reinforced plastic in black primer (matte) which can be painted over or can be used as is. It is also available in high-quality carbon fiber with either a gloss or a matte top coat finish.

The Fender Flare Kit does not require any drilling or trimming of the OEM parts on the car.

The Fender Flares are held on by 3M™ Super Strength Molding Tape, as well as the OEM bolts and clips in the wheel wells. It is a simple bolt-on replacement, without the need to modify any OEM body panels.

The vehicle’s surface needs to be thoroughly cleaned with alcohol before the installation to ensure a proper bond with the 3M™ tape.

We recommend applying adhesion promoter on the back side of the flares before installing the 3M™ tape to help with better adhesion. Apply double layers of the 3M™ tape for the best result. Optimal surface temperature for the 3M™ Super Strength Molding Tape is above 65°F (18°C).

Sold as a set with eight flare-pieces.

Our 2022-Current Lexus LX600/700h Fender Flare Kit is about 2 inches wide. It is designed to provide extra protection to your vehicle’s body panels from the dirt and rocks picked up by wider and taller off-road tires.

The kit is available in high-quality automotive grade fiber-reinforced plastic in black primer (matte) which can be painted over or can be used as is. It is also available in high-quality carbon fiber with either a gloss or a matte top coat finish.

The Fender Flare Kit does not require any drilling or trimming of the OEM parts on the car.

The Fender Flares are held on by 3M™ Super Strength Molding Tape, as well as the OEM bolts in the wheel wells. It is a simple installation, without the need to modify any OEM body panels, other than the removal of the OEM fender flares.

The vehicle’s surface needs to be thoroughly cleaned with alcohol before the installation to ensure a proper bond with the 3M™ tape.

We recommend applying adhesion promoter on the back side of the flares before installing the 3M™ tape to help with better adhesion. Apply double layers of the 3M™ tape for the best result. Optimal surface temperature for the 3M™ Super Strength Molding Tape is above 65°F (18°C).

Transfer Case Knob only.

1 Piece Billet 6061-T6 Aluminum Shift Knobs. Precision CNC machined in the USA. Durable anodized finishes. Exposed stainless steel or anodized aluminum socket head cap screws for a bold industrial look. Engraved logos will never wear off. Engineered to be ergonomic. Easy installation, simply thread onto factory shaft against jam nuts (included). Free technical support: adam@ajtdesign-llc.com.

Transfer case knob is engraved with H-HL-N-LL shift pattern.

Weight of gearshift knob is approximately 11.5oz (326g).

Compatibility:

• 2007-2014 FJ Cruiser with 6-speed manual transmission.
• Contact adam@ajtdesign-llc.com to inquire about product compatibility and alternate applications.

AJT Design is not in any way sponsored by or affiliated with Toyota.