Includes 2 covers (1LH+1RH).

Interior door handle covers for the 2016-2023 Tacoma. Injection molded of high strength and impact resistant ABS plastic. Secured with a snap fit.

Installation is easy, simply snap on.

Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

Includes 2 covers (1LH+1RH).

Interior door handle covers for the 2016-2023 Tacoma. Injection molded of high strength and impact resistant ABS plastic. Secured with a snap fit.

Installation is easy, simply snap on.

Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

Not compatible with dual zone climate control.

INCLUDES 3 RINGS

Replacement trim rings for the 2016-2023 Tacoma climate knobs. Injection molded of high strength and impact resistant ABS plastic. Easy install, factory rings pop off with a small screwdriver, new rings snap in. Reuses factory indicator lens. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

Glovebox Tacoma Inlay for the 2016-2023 Tacoma. Injection molded of high strength and impact resistant ABS plastic, our design features a matte finish and crisp edges. Install is easy, though the glovebox area must be thoroughly cleaned. These pieces attach with pre applied VHB tape. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction Video:

Glovebox Tacoma Inlay for the 2016-2023 Tacoma. Injection molded of high strength and impact resistant ABS plastic, our design features a matte finish and crisp edges. Install is easy, though the glovebox area must be thoroughly cleaned. These pieces attach with pre applied VHB tape. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

4x4 Knob:

Injection molded of high strength and impact resistant ABS plastic. Install is easy, though some dashboard disassembly is required. Factory module is taken apart with a small phillips screwdriver (not included), OEM knob is un-clipped with a small screwdriver (not included). New knob snaps in place like the OEM piece. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

TAKE CARE NOT TO LOSE SPRINGS OR SPACERS INSIDE 4X4 KNOB

Shift gate trim ring for the 2014-2021 Tundra with console shifter. Covers all the chrome. Injection molded of high strength and impact resistant ABS plastic.

Easy install, simply remove shift knob (twist off) and snap the trim ring in place. No tools required.

Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

Toyota emblem overlay chrome delete for 2012+ Tacoma, 2007+ Tundra, 2010+ 4Runner, 2007-2014 FJ Cruiser, 2013+ Rav4 steering wheels. May fit other applications with the same steering wheel, see compatibility photo(s). May cover emblems on other Toyota steering wheels but fit is not guaranteed. Adheres over existing chrome emblem with adhesive tape, no disassembly or removal or chrome emblem required, will not damage chrome emblem or steering wheel. Made of durable ABS plastic. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Due to a cease and desist issed by Toyota we are no longer able to sell the emblem overlays that feature the Toyota logo.

Use supplied alcohol swab to clean chrome emblem only, alcohol may remove the finish from the steering wheel.

4 PACK INCLUDES 4 KNOBS

Replacement dial style climate control knobs for the 2007-2013 Tundra LIMITED. Injection molded of high strength and impact resistant ABS plastic. Assembly requires removal of dash panels and careful removal of knobs. This is not difficult, but care must be taken to keep knobs properly indexed. Please watch the instruction video before installing. Assembly requires a flat and phillips screwdriver (not included). Made in USA.

Not compatible with all trim packages, please see compatibility photos.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

Glovebox Tacoma Inlay for the 2016-2023 Tacoma. Injection molded of high strength and impact resistant ABS plastic, our design features a matte finish and crisp edges. Install is easy, though the glovebox area must be thoroughly cleaned. These pieces attach with pre applied VHB tape. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

Includes 4 covers (2LH+2RH).

Interior door handle covers for the 2016-2023 Tacoma. Injection molded of high strength and impact resistant ABS plastic. Secured with a snap fit.

Installation is easy, simply snap on.

Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

INCLUDES 2 KNOBS

Replacement radio knobs for the 2020-2023 Tacoma. Injection molded of high strength and impact resistant ABS plastic. Lights up like the OEM knobs. Easy pull off/press on assembly, no tools required. Made in USA.

Only compatible with specific radio units. Remove knob and carefully check compatibility photos before ordering!

AJT Design is not in any way sponsored by or affiliated with Toyota.

Includes 4 covers (2LH+2RH).

Interior door handle covers for the 2016-2023 Tacoma. Injection molded of high strength and impact resistant ABS plastic. Secured with a snap fit.

Installation is easy, simply snap on.

Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

INCLUDES 2 KNOBS

Replacement radio knobs for the 2020-2023 Tacoma. Injection molded of high strength and impact resistant ABS plastic. Lights up like the OEM knobs. Easy pull off/press on assembly, no tools required. Made in USA.

Only compatible with specific radio units. Remove knob and carefully check compatibility photos before ordering!

AJT Design is not in any way sponsored by or affiliated with Toyota.

INCLUDES 2 KNOBS

Replacement radio knobs for the 2016-19 Tacoma. Injection molded of high strength and impact resistant ABS plastic. Easy pull off/press on assembly, no tools required. Made in USA.

Only compatible with specific radio units. Remove knob and carefully check compatibility photos before ordering!

AJT Design is not in any way sponsored by or affiliated with Toyota.

3 piece vent trim overlay covers for the 2024+ Tacoma and 2025+ 4Runner.  Injection molded of high strength and impact resistant ABS plastic.

Easy install, trim pieces attach with VHB tape.

Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction Video:

Start Button Ring:

Injection molded of high strength and impact resistant ABS plastic. Install is easy, factory ring is removed with a small screwdriver (not included), the new ring snaps in place like the OEM piece. Made in USA.

4x4 Knob:

Injection molded of high strength and impact resistant ABS plastic. Install is easy, though some dashboard disassembly is required. Factory module is taken apart with a small phillips screwdriver (not included), OEM knob is un-clipped with a small screwdriver (not included). New knob snaps in place like the OEM piece. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

TAKE CARE NOT TO LOSE SPRINGS OR SPACERS INSIDE 4X4 KNOB

Start Button Ring:

Injection molded of high strength and impact resistant ABS plastic. Install is easy, factory ring is removed with a small screwdriver (not included), the new ring snaps in place like the OEM piece. Made in USA.

4x4 Knob:

Injection molded of high strength and impact resistant ABS plastic. Install is easy, though some dashboard disassembly is required. Factory module is taken apart with a small phillips screwdriver (not included), OEM knob is un-clipped with a small screwdriver (not included). New knob snaps in place like the OEM piece. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

TAKE CARE NOT TO LOSE SPRINGS OR SPACERS INSIDE 4X4 KNOB

Start Button Ring:

Injection molded of high strength and impact resistant ABS plastic. Install is easy, factory ring is removed with a small screwdriver (not included), the new ring snaps in place like the OEM piece. Made in USA.

4x4 Knob:

Injection molded of high strength and impact resistant ABS plastic. Install is easy, though some dashboard disassembly is required. Factory module is taken apart with a small phillips screwdriver (not included), OEM knob is un-clipped with a small screwdriver (not included). New knob snaps in place like the OEM piece. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

TAKE CARE NOT TO LOSE SPRINGS OR SPACERS INSIDE 4X4 KNOB

Start Button Ring:

Injection molded of high strength and impact resistant ABS plastic. Install is easy, factory ring is removed with a small screwdriver (not included), the new ring snaps in place like the OEM piece. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

4x4 Knob:

Injection molded of high strength and impact resistant ABS plastic. Install is easy, though some dashboard disassembly is required. Factory module is taken apart with a small phillips screwdriver (not included), OEM knob is un-clipped with a small screwdriver (not included). New knob snaps in place like the OEM piece. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

TAKE CARE NOT TO LOSE SPRINGS OR SPACERS INSIDE 4X4 KNOB

4x4 Knob:

Injection molded of high strength and impact resistant ABS plastic. Install is easy, though some dashboard disassembly is required. Factory module is taken apart with a small phillips screwdriver (not included), OEM knob is un-clipped with a small screwdriver (not included). New knob snaps in place like the OEM piece. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

TAKE CARE NOT TO LOSE SPRINGS OR SPACERS INSIDE 4X4 KNOB

Start Button Ring:

Injection molded of high strength and impact resistant ABS plastic. Install is easy, factory ring is removed with a small screwdriver (not included), the new ring snaps in place like the OEM piece. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

Toyota emblem overlay chrome delete for 2012+ Tacoma, 2007+ Tundra, 2010+ 4Runner, 2007-2014 FJ Cruiser, 2013+ Rav4 steering wheels. May fit other applications with the same steering wheel, see compatibility photo(s). May cover emblems on other Toyota steering wheels but fit is not guaranteed. Adheres over existing chrome emblem with adhesive tape, no disassembly or removal or chrome emblem required, will not damage chrome emblem or steering wheel. Made of durable ABS plastic. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Due to a cease and desist issed by Toyota we are no longer able to sell the emblem overlays that feature the Toyota logo.

Use supplied alcohol swab to clean chrome emblem only, alcohol may remove the finish from the steering wheel.