The Injection Fob is a two piece plastic case that replaces the factory case that comes with the vehicle. Injection molded of high strength and impact resistant PC-ABS plastic. Instead of an annular snap fit, this design bolts together with socket head cap screws for a more rugged and straightforward approach. Assembly requires 7/64" allen key (included). Made in USA.

Applications:

• 2014-2018 Chevrolet Silverado / GMC Sierra
• 2019-2021 Chevrolet Silverado / GMC Sierra (non smart fob)
• 2013-2022 Chevrolet Colorado / GMC Canyon
• 2012-2020 Chevrolet Suburban / Chevrolet Tahoe / GMC Yukon / GMC Yukon XL

Please verify your fob looks like the one in our instruction video/compatible photos. Not compatible with "smart key" models. Compatible with and without the chrome "wings". Compatible with and without remote start (we include 2 different buttons). Compatible with and without remote tailgate/lift glass (multiple buttons included).

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

Existing electronics and battery are reused (not included with purchase) and packaged into the new case, no reprogramming.

Order 2 and save $4! Enter coupon code "Qty2" at check out. Contact AJT DESIGN for discounted prices on higher quantities.

Instruction Video :

PLEASE WATCH INSTRUCTION VIDEOS BEFORE PURCHASING!

The Injection Fob is a two piece plastic case that replaces the factory case that comes with the vehicle. Injection molded of high strength and impact resistant ABS plastic. Instead of an annular snap fit, this design bolts together with socket head cap screws for a more rugged and straightforward approach. Assembly requires 3/32" allen key (included). Made in USA.

Applications: (please verify your fob looks like the one in our instruction video/compatible photos)

• 2018-2019 Tundra
• 2016+ Tacoma Manual/SR5/Base (without push button ignition)
• Various Toyota H key

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

Existing key blade, electronics, battery, transponder chip are reused (not included with purchase) and packaged into the new case, no reprogramming. Re cutting a key is not necessary, however the OEM case must be destroyed to extract the key, as the key is molded into it. In most cases the key will pull out easily, though in some instances it must be cut out. If it is desired to retain the original case/key, an additional OEM shell/key only may be purchased and that key can be cut. Alternatively, the integrated key blade may be discarded altogether and a separate key can be used. This method requires the use of the OEM valet key or purchase of a Toyota key with the H chip (Toyota P/N 89785-0D170), this key must be cut and reprogrammed at the dealer or locksmith. In some cases the transponder is easily removed, though in most cases it will be glued and require cutting the case and/or heat for removal, this can be somewhat difficult. If care is not used during removal, the transponder may become damaged and stop working (fob/key will not start vehicle). AJT Design is not responsible from broken transponders.

Order 2 and save $4! Enter coupon code "Qty2" at check out. Contact AJT DESIGN for discounted prices on higher quantities.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction Video :

Transponder Removal Instructions:

Valet/emergency key does not package into case like the OEM case. Removing this feature allows for a design that is smaller, stronger and symmetrical.

This is not the same case as the 2016+ V2 Tacoma version, the outside looks the same but the inside geometry is different.

The Injection Fob is a two piece plastic case that replaces the factory case that comes with the vehicle. For 5th Gen 4Runner Limited (2010+) with push button start only. Injection molded of high strength and impact resistant ABS plastic. Existing electronics, battery, and seal are reused (not included with purchase) and packaged into the new case. Instead of an annular snap fit, this design bolts together with socket head cap screws for a more rugged and straightforward approach. Assembly requires 3/32" allen key (included). Made in USA.

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

Order 2 and save $4! Enter coupon code "Qty2" at check out. Contact AJT DESIGN for discounted prices on higher quantities.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

The Injection Fob is a two piece plastic case that replaces the factory case that comes with the vehicle. Injection molded of high strength and impact resistant PC-ABS plastic. Instead of an annular snap fit, this design bolts together with socket head cap screws for a more rugged and straightforward approach. Assembly requires 3/32" allen key (included). Made in USA.

Applications:

• 2022+ Chevrolet Silverado / GMC Sierra

Please verify your fob looks like the one in our instruction video/compatible photos. Not compatible with Suburban/Tahoe/Yukon.

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

Existing electronics and battery are reused (not included with purchase) and packaged into the new case, no reprogramming.

Emergency/valet key does not insert into new case.

Order 2 and save $4! Enter coupon code "Qty2" at check out. Contact AJT DESIGN for discounted prices on higher quantities.

Instruction Video :

The Injection Fob is a two piece plastic case that replaces the factory case that comes with the vehicle. For Tacomas and Tundras. Injection molded of high strength and impact resistant ABS plastic. Existing electronics, battery, buttons, and seal are reused (not included with purchase) and packaged into the new case. Instead of an annular snap fit, this design bolts together with socket head cap screws for a more rugged and straightforward approach. Robust key ring hole eliminates the common breakage of the factory fob. Assembly requires 7/64" allen key (included). Made in USA.

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

Order 2 and save $4! Enter coupon code "Qty2" at check out. Contact AJT DESIGN for discounted prices on higher quantities.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

The Injection Fob is a two piece plastic case that replaces the factory case that comes with the vehicle. For certain 2014+ Subaru applications with smart fob only, please see compatibility photo. Injection molded of high strength and impact resistant PC-ABS plastic. Existing valet key, electronics, battery, spring, key button, and seal are reused (not included with purchase) and packaged into the new case. Instead of an annular snap fit, this design bolts together with socket head cap screws for a more rugged and straightforward approach. Assembly requires 3/32" allen key (included). Made in USA.

Both black and red button sets include a red and black panic button.

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

Order 2 and save $4! Enter coupon code "Qty2" at check out. Contact AJT DESIGN for discounted prices on higher quantities.

AJT Design is not in any way sponsored by or affiliated with Subaru.

Instruction Video:

V2 Version Updates:

Valet/emergency key does not package into case like the OEM case or our original 2016+ case. Removing this feature allows for a design that is smaller, stronger and symmetrical.

This is not the same case as the 5th Gen 4Runner Limited version, the outside looks the same but the inside geometry is different.

The Injection Fob is a two piece plastic case that replaces the factory case that comes with the vehicle. For 2016+ Tacomas with push button start only. Injection molded of high strength and impact resistant ABS plastic. Existing electronics, battery, and seal are reused (not included with purchase) and packaged into the new case. Instead of an annular snap fit, this design bolts together with socket head cap screws for a more rugged and straightforward approach. Assembly requires 3/32" allen key (included). Made in USA.

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

Order 2 and save $4! Enter coupon code "Qty2" at check out. Contact AJT DESIGN for discounted prices on higher quantities.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

Flip key is removed from OEM fob. The key itself can be removed from the knuckle and stored in the case or put on a key ring. The key will not "flip" in our product.

Includes buttons for the remote start and non-remote start versions. Not compatible with the no-button version.

Standard buttons are hard plastic, soft touch are rubber.

The Injection Fob is a two piece plastic case that replaces the factory case that comes with the vehicle. For 2018+ Wrangler JL and Gladiator JT with key-less entry. Injection molded of high strength and impact resistant PC-ABS plastic. Existing electronics and battery are reused (not included with purchase) and packaged into the new case. Instead of an annular snap fit, this design bolts together with socket head cap screws for a more rugged and straightforward approach. Assembly requires 7/64" allen key (included). Made in USA.

Install Notes:

Some users may have difficulty inserting the battery and assembling the case. The instruction video shows proper technique, a small screwdriver can help position the battery as well.

Adjusting the battery contact spring will help the case go together much easier.

Make sure to use a name brand battery with a square side profile such as Duracell. Off brands such as those that may come with the OEM fob with a stepped profile are much more difficult to install.

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

Order 2 and save $4! Enter coupon code "Qty2" at check out. Contact AJT DESIGN for discounted prices on higher quantities.

Instruction video:

The Injection Fob is a two piece plastic case that replaces the factory case that comes with the vehicle. For (some) 3rd and 4th Gen 4Runners and 1st gen Sequoia. Injection molded of high strength and impact resistant ABS plastic. Existing electronics, battery, buttons, and seal are reused (not included with purchase) and packaged into the new case. Instead of an annular snap fit, this design bolts together with socket head cap screws for a more rugged and straightforward approach. Robust key ring hole eliminates the common breakage of the factory fob. Includes panic button. Assembly requires 7/64" allen key (included). Made in USA.

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

Order 2 and save $4! Enter coupon code "Qty2" at check out. Contact AJT DESIGN for discounted prices on higher quantities.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

The Injection Fob is a two piece plastic case that replaces the factory case that comes with the vehicle. Injection molded of high strength and impact resistant PC-ABS plastic. Instead of an annular snap fit, this design bolts together with socket head cap screws for a more rugged and straightforward approach. Assembly requires 7/64" allen key (included). Made in USA.

Case is identical to V1 IF010. The V1.5 IF022 includes upgraded buttons with white icons, red panic icon, tailgate button.

Applications:

• 2014-2018 Chevrolet Silverado / GMC Sierra
• 2019-2021 Chevrolet Silverado / GMC Sierra (non smart fob)
• 2013-2022 Chevrolet Colorado / GMC Canyon

Please verify your fob looks like the one in our instruction video/compatible photos. Not compatible with "smart key" models. Compatible with and without the chrome "wings".

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

Existing electronics and battery are reused (not included with purchase) and packaged into the new case, no reprogramming.

Order 2 and save $4! Enter coupon code "Qty2" at check out. Contact AJT DESIGN for discounted prices on higher quantities.

Instruction Video :

The Injection Fob is a two piece plastic case that replaces the factory case that comes with the vehicle. Injection molded of high strength and impact resistant ABS plastic. Instead of an annular snap fit, this design bolts together with socket head cap screws for a more rugged and straightforward approach. Assembly requires 3/32" allen key (included). Made in USA.

Applications: (please verify your fob looks like the one in our instruction video/compatible photos)

• 2008-2014 Toyota FJ Cruiser
• 1998-2007 Toyota Land Cruiser
• 2003-2009 Lexus GX 470
• Lexus LS, IS, SC, RX, ES, GS, RX (see compatible photos)

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

Existing key blade, electronics, battery, transponder are reused (not included with purchase) and packaged into the new case, no reprogramming. Re cutting a key is not necessary, however the OEM case must be destroyed to extract the key, as the key is molded into it. This requires a simple cutting procedure, see instruction video.

Order 2 and save $4! Enter coupon code "Qty2" at check out. Contact AJT DESIGN for discounted prices on higher quantities.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction Videos:

PLEASE WATCH INSTRUCTION VIDEOS BEFORE PURCHASING!

The Injection Fob is a two piece plastic case that replaces the factory case that comes with the vehicle. Injection molded of high strength and impact resistant PC-ABS plastic. Instead of an annular snap fit, this design bolts together with socket head cap screws for a more rugged and straightforward approach. Assembly requires 3/32" allen key (included). Made in USA.

Applications: (please verify your fob looks like the one in our instruction video/compatible photos)

• 2018-19 Tundra
• 2016+ Tacoma Manual/SR5/Base (without push button ignition)
• Various Toyota H key

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

Existing key blade, electronics, battery, transponder chip are reused (not included with purchase) and packaged into the new case, no reprogramming. Re cutting a key is not necessary, however the OEM case must be destroyed to extract the key, as the key is molded into it. In most cases the key will pull out easily, though in some instances it must be cut out. If it is desired to retain the original case/key, an additional OEM shell/key only may be purchased and that key can be cut. Alternatively, the integrated key blade may be discarded altogether and a separate key can be used. This method requires the use of the OEM valet key or purchase of a Toyota key with the H chip (Toyota P/N 89785-0D170), this key must be cut and reprogrammed at the dealer or locksmith. In some cases the transponder is easily removed, though in most cases it will be glued and require cutting the case and/or heat for removal, this can be somewhat difficult. If care is not used during removal, the transponder may become damaged and stop working (fob/key will not start vehicle). AJT Design is not responsible from broken transponders.

Order 2 and save $4! Enter coupon code "Qty2" at check out. Contact AJT DESIGN for discounted prices on higher quantities.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction Video :

Transponder Removal Instructions:

Color note: This green will be somewhat close to "Mojito", but not exact at the Mojito color is metallic and our molded case is not.

Flip key is removed from OEM fob. The key itself can be removed from the knuckle and stored in the case or put on a key ring. The key will not "flip" in our product.

Includes buttons for the remote start and non-remote start versions. Not compatible with the no-button version.

Standard buttons are hard plastic, soft touch are rubber.

The Injection Fob is a two piece plastic case that replaces the factory case that comes with the vehicle. For 2018+ Wrangler JL and Gladiator JT with key-less entry. Injection molded of high strength and impact resistant PC-ABS plastic. Existing electronics and battery are reused (not included with purchase) and packaged into the new case. Instead of an annular snap fit, this design bolts together with socket head cap screws for a more rugged and straightforward approach. Assembly requires 7/64" allen key (included). Made in USA.

Install Notes:

Some users may have difficulty inserting the battery and assembling the case. The instruction video shows proper technique, a small screwdriver can help position the battery as well.

Adjusting the battery contact spring will help the case go together much easier.

Make sure to use a name brand battery with a square side profile such as Duracell. Off brands such as those that may come with the OEM fob with a stepped profile are much more difficult to install.

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

Order 2 and save $4! Enter coupon code "Qty2" at check out. Contact AJT DESIGN for discounted prices on higher quantities.

Instruction video:

The Injection Fob is a two piece plastic case that replaces the factory case that comes with the vehicle. For Tacomas and Tundras. Injection molded of high strength and impact resistant ABS plastic. Existing electronics, battery, buttons, and seal are reused (not included with purchase) and packaged into the new case. Instead of an annular snap fit, this design bolts together with socket head cap screws for a more rugged and straightforward approach. Robust key ring hole eliminates the common breakage of the factory fob. Assembly requires 7/64" allen key (included). Made in USA.

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

Order 2 and save $4! Enter coupon code "Qty2" at check out. Contact AJT DESIGN for discounted prices on higher quantities.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

The Injection Fob is a two piece plastic case that replaces the factory case that comes with the vehicle. For (some) 3rd and 4th Gen 4Runners and 1st gen Sequoia. Injection molded of high strength and impact resistant ABS plastic. Existing electronics, battery, buttons, and seal are reused (not included with purchase) and packaged into the new case. Instead of an annular snap fit, this design bolts together with socket head cap screws for a more rugged and straightforward approach. Robust key ring hole eliminates the common breakage of the factory fob. Includes panic button. Assembly requires 7/64" allen key (included). Made in USA.

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

Order 2 and save $4! Enter coupon code "Qty2" at check out. Contact AJT DESIGN for discounted prices on higher quantities.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

PLEASE WATCH INSTRUCTION VIDEOS BEFORE PURCHASING!

The Injection Fob is a two piece plastic case that replaces the factory case that comes with the vehicle. Injection molded of high strength and impact resistant PC-ABS plastic. Instead of an annular snap fit, this design bolts together with socket head cap screws for a more rugged and straightforward approach. Assembly requires 3/32" allen key (included). Made in USA.

Applications: (please verify your fob looks like the one in our instruction video/compatible photos)

• 2018-19 Tundra
• 2016+ Tacoma Manual/SR5/Base (without push button ignition)
• Various Toyota H key

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

Existing key blade, electronics, battery, transponder chip are reused (not included with purchase) and packaged into the new case, no reprogramming. Re cutting a key is not necessary, however the OEM case must be destroyed to extract the key, as the key is molded into it. In most cases the key will pull out easily, though in some instances it must be cut out. If it is desired to retain the original case/key, an additional OEM shell/key only may be purchased and that key can be cut. Alternatively, the integrated key blade may be discarded altogether and a separate key can be used. This method requires the use of the OEM valet key or purchase of a Toyota key with the H chip (Toyota P/N 89785-0D170), this key must be cut and reprogrammed at the dealer or locksmith. In some cases the transponder is easily removed, though in most cases it will be glued and require cutting the case and/or heat for removal, this can be somewhat difficult. If care is not used during removal, the transponder may become damaged and stop working (fob/key will not start vehicle). AJT Design is not responsible from broken transponders.

Order 2 and save $4! Enter coupon code "Qty2" at check out. Contact AJT DESIGN for discounted prices on higher quantities.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction Video :

Transponder Removal Instructions:

The Injection Fob is a two piece plastic case that replaces the factory case that comes with the vehicle. For certain 2014+ Subaru applications with smart fob only, please see compatibility photo. Injection molded of high strength and impact resistant PC-ABS plastic. Existing valet key, electronics, battery, spring, key button, and seal are reused (not included with purchase) and packaged into the new case. Instead of an annular snap fit, this design bolts together with socket head cap screws for a more rugged and straightforward approach. Assembly requires 3/32" allen key (included). Made in USA.

Both black and red button sets include a red and black panic button.

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

Order 2 and save $4! Enter coupon code "Qty2" at check out. Contact AJT DESIGN for discounted prices on higher quantities.

AJT Design is not in any way sponsored by or affiliated with Subaru.

Instruction Video:

Valet/emergency key does not package into case like the OEM case. Removing this feature allows for a design that is smaller, stronger and symmetrical.

This is not the same case as the 2016+ V2 Tacoma version, the outside looks the same but the inside geometry is different.

The Injection Fob is a two piece plastic case that replaces the factory case that comes with the vehicle. For 5th Gen 4Runner Limited (2010+) with push button start only. Injection molded of high strength and impact resistant ABS plastic. Existing electronics, battery, and seal are reused (not included with purchase) and packaged into the new case. Instead of an annular snap fit, this design bolts together with socket head cap screws for a more rugged and straightforward approach. Assembly requires 3/32" allen key (included). Made in USA.

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

Order 2 and save $4! Enter coupon code "Qty2" at check out. Contact AJT DESIGN for discounted prices on higher quantities.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

Color note: This green will be somewhat close to "Lime Rush", but not exact at the Lime Rush color is metallic and our molded case is not.

The Injection Fob is a two piece plastic case that replaces the factory case that comes with the vehicle. For certain 2019+ Rav4, 2022+ 4Runner, Camry and other Toyota applications with push button start only, please see compatibility photo. Injection molded of high strength and impact resistant PC-ABS plastic. Existing valet key, electronics, battery, and seal are reused (not included with purchase) and packaged into the new case. Instead of an annular snap fit, this design bolts together with socket head cap screws for a more rugged and straightforward approach. Assembly requires 3/32" allen key (included). Made in USA.

Button sets include both a "Liftgate" and blank button to accommodate both 3 and 4 button versions. Both black and red button sets include a red and black panic button.

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

Order 2 and save $4! Enter coupon code "Qty2" at check out. Contact AJT DESIGN for discounted prices on higher quantities.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

The Injection Fob is a two piece plastic case that replaces the factory case that comes with the vehicle. For certain 2019+ Rav4, 2022+ 4Runner, Camry and other Toyota applications with push button start only, please see compatibility photo. Injection molded of high strength and impact resistant PC-ABS plastic. Existing valet key, electronics, battery, and seal are reused (not included with purchase) and packaged into the new case. Instead of an annular snap fit, this design bolts together with socket head cap screws for a more rugged and straightforward approach. Assembly requires 3/32" allen key (included). Made in USA.

Button sets include both a "Liftgate" and blank button to accommodate both 3 and 4 button versions. Both black and red button sets include a red and black panic button.

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

Order 2 and save $4! Enter coupon code "Qty2" at check out. Contact AJT DESIGN for discounted prices on higher quantities.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

NOTE: Top does not contain "FJ" logo.

The Injection Fob is a two piece plastic case that replaces the factory case that comes with the vehicle. For early year FJ Cruisers. For 1st Gen Tundras and possibly some 1st Gen Tacomas. Injection molded of high strength and impact resistant ABS plastic. Existing electronics, battery, buttons, and seal are reused (not included with purchase) and packaged into the new case. Instead of an annular snap fit, this design bolts together with socket head cap screws for a more rugged and straightforward approach. Robust key ring hole eliminates the common breakage of the factory fob. Includes panic button. Assembly requires 7/64" allen key (included). Made in USA.

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

Order 2 and save $4! Enter coupon code "Qty2" at check out. Contact AJT DESIGN for discounted prices on higher quantities.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

The Injection Fob is a two piece plastic case that replaces the factory case that comes with the vehicle. For Jeep Wrangler JKs 2007-2018 and other Chrysler applications using the same factory fob. Compatible with and without factory remote start (2 different buttons are included). Injection molded of high strength and impact resistant ABS plastic. Instead of an annular snap fit, this design bolts together with socket head cap screws for a more rugged and straightforward approach. Assembly requires 7/64" allen key (included). Made in USA.

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

Existing key blade, electronics, battery, transponder are reused (not included with purchase) and packaged into the new case, no reprogramming. Re cutting a key is not necessary, however the OEM case must be destroyed to extract the key, as the key is molded into it. This requires a simple cutting procedure, see instruction video.

In some rare instances (less than 0.2%), the key in the factory fob may not be compatible with our product. A check for metal in the side circles (see photo) should be made before the key is broken out. AJT DESIGN is not responsible for incompatible keys.

Order 2 and save $4! Enter coupon code "Qty2" at check out. Contact AJT DESIGN for discounted prices on higher quantities.

Instruction Video:

The Injection Fob is a two piece plastic case that replaces the factory case that comes with the vehicle. For certain 2014+ Subaru applications with smart fob only, please see compatibility photo. Injection molded of high strength and impact resistant PC-ABS plastic. Existing valet key, electronics, battery, spring, key button, and seal are reused (not included with purchase) and packaged into the new case. Instead of an annular snap fit, this design bolts together with socket head cap screws for a more rugged and straightforward approach. Assembly requires 3/32" allen key (included). Made in USA.

Both black and red button sets include a red and black panic button.

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

Order 2 and save $4! Enter coupon code "Qty2" at check out. Contact AJT DESIGN for discounted prices on higher quantities.

AJT Design is not in any way sponsored by or affiliated with Subaru.

Instruction Video:

The Injection Fob is a two piece plastic case that replaces the factory case that comes with the vehicle. Injection molded of high strength and impact resistant PC-ABS plastic. Instead of an annular snap fit, this design bolts together with socket head cap screws for a more rugged and straightforward approach. Assembly requires 7/64" allen key (included). Made in USA.

Case is identical to V1 IF010. The V1.5 IF022 includes upgraded buttons with white icons, red panic icon, tailgate button.

Applications:

• 2014-2018 Chevrolet Silverado / GMC Sierra
• 2019-2021 Chevrolet Silverado / GMC Sierra (non smart fob)
• 2013-2022 Chevrolet Colorado / GMC Canyon

Please verify your fob looks like the one in our instruction video/compatible photos. Not compatible with "smart key" models. Compatible with and without the chrome "wings".

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

Existing electronics and battery are reused (not included with purchase) and packaged into the new case, no reprogramming.

Order 2 and save $4! Enter coupon code "Qty2" at check out. Contact AJT DESIGN for discounted prices on higher quantities.

Instruction Video :

The Injection Fob is a two piece plastic case that replaces the factory case that comes with the vehicle. For certain 2017+ Ford applications with smart fob only, please see compatibility photo. Injection molded of high strength and impact resistant PC-ABS plastic. Existing valet key, electronics and battery are reused (not included with purchase) and packaged into the new case. Instead of an annular snap fit, this design bolts together with socket head cap screws for a more rugged and straightforward approach. Assembly requires 7/64" allen key (included). Made in USA.

Includes all buttons shown in the photo, buttons are either all black, all red or all black with additional red panic.

The valet key may be removed from the knuckle and stored inside the case, see instruction video.

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

Order 2 and save $4! Enter coupon code "Qty2" at check out. Contact AJT DESIGN for discounted prices on higher quantities.

AJT Design is not in any way sponsored by or affiliated with Ford.

Instruction Video:

The Injection Fob is a two piece plastic case that replaces the factory case that comes with the vehicle. For certain 2017+ Ford applications with smart fob only, please see compatibility photo. Injection molded of high strength and impact resistant PC-ABS plastic. Existing valet key, electronics and battery are reused (not included with purchase) and packaged into the new case. Instead of an annular snap fit, this design bolts together with socket head cap screws for a more rugged and straightforward approach. Assembly requires 7/64" allen key (included). Made in USA.

Includes all buttons shown in the photo, buttons are either all black, all red or all black with additional red panic.

The valet key may be removed from the knuckle and stored inside the case, see instruction video.

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

Order 2 and save $4! Enter coupon code "Qty2" at check out. Contact AJT DESIGN for discounted prices on higher quantities.

AJT Design is not in any way sponsored by or affiliated with Ford.

Instruction Video:

SEE PHOTOS AND SELECT CORRECT BUTTON SET

Slide key is removed from OEM fob. The key itself can be removed from the knuckle and stored in the case or put on a key ring. The key will not "slide" into our product.

Includes buttons for several versions, please review compatible/not compatible photos carefully!

The Injection Fob is a two piece plastic case that replaces the factory case that comes with the vehicle. For 2019+ RAM with key-less entry. Injection molded of high strength and impact resistant PC-ABS plastic. Existing electronics, battery, and seal are reused (not included with purchase) and packaged into the new case. Instead of an annular snap fit, this design bolts together with socket head cap screws for a more rugged and straightforward approach. Assembly requires 7/64" allen key (included). Made in USA.

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

Order 2 and save 4! Enter coupon code "Qty2" at check out. Contact AJT DESIGN for discounted prices on higher quantities.

Instruction video:

The Injection Fob is a two piece plastic case that replaces the factory case that comes with the vehicle. For Tacomas and Tundras. Injection molded of high strength and impact resistant ABS plastic. Existing electronics, battery, buttons, and seal are reused (not included with purchase) and packaged into the new case. Instead of an annular snap fit, this design bolts together with socket head cap screws for a more rugged and straightforward approach. Robust key ring hole eliminates the common breakage of the factory fob. Assembly requires 7/64" allen key (included). Made in USA.

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

Order 2 and save $4! Enter coupon code "Qty2" at check out. Contact AJT DESIGN for discounted prices on higher quantities.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

PLEASE WATCH INSTRUCTION VIDEOS BEFORE PURCHASING!

The Injection Fob is a two piece plastic case that replaces the factory case that comes with the vehicle. For 5th Gen 4Runners without push button start, and other Toyota applications. Injection molded of high strength and impact resistant ABS plastic (black is PC-ABS). Instead of an annular snap fit, this design bolts together with socket head cap screws for a more rugged and straightforward approach. Assembly requires 7/64" allen key (included). Made in USA.

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

Existing key blade, electronics, battery, transponder chip are reused (not included with purchase) and packaged into the new case, no reprogramming. Re cutting a key is not necessary, however the OEM case must be destroyed to extract the key, as the key is molded into it. In most cases the key will pull out easily, though in some instances it must be cut out. If it is desired to retain the original case/key, an additional OEM shell/key only may be purchased and that key can be cut. Alternatively, the integrated key blade may be discarded altogether and a separate key can be used. This method requires the use of the OEM valet key or purchase of a Toyota key with the G chip (Toyota P/N 89785-08040), this key must be cut and reprogrammed at the dealer or locksmith. In some cases the transponder is easily removed, though in most cases it will be glued and require cutting the case and/or heat for removal, this can be somewhat difficult. If care is not used during removal, the transponder may become damaged and stop working (fob/key will not start vehicle). AJT Design is not responsible from broken transponders.

Order 2 and save $4! Enter coupon code "Qty2" at check out. Contact AJT DESIGN for discounted prices on higher quantities.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction Video (updated):

Transponder Removal Instructions:

The Injection Fob is a two piece plastic case that replaces the factory case that comes with the vehicle. For (some) 3rd and 4th Gen 4Runners and 1st gen Sequoia. Injection molded of high strength and impact resistant ABS plastic. Existing electronics, battery, buttons, and seal are reused (not included with purchase) and packaged into the new case. Instead of an annular snap fit, this design bolts together with socket head cap screws for a more rugged and straightforward approach. Robust key ring hole eliminates the common breakage of the factory fob. Includes panic button. Assembly requires 7/64" allen key (included). Made in USA.

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

Order 2 and save $4! Enter coupon code "Qty2" at check out. Contact AJT DESIGN for discounted prices on higher quantities.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video: