4 PACK INCLUDES 4 KNOBS

Replacement dial style climate control knobs for the 2007-2013 Tundra. Injection molded of high strength and impact resistant ABS plastic. Socket head cap screws for rugged good looks. Clear indicator lights up the same color as OEM and provides tactile feedback. Assembly requires removal of dash panels and careful removal of knobs. This is not difficult, but care must be taken to keep knobs properly indexed. Please watch the instruction video before installing. Assembly requires a flat and phillips screwdriver (not included) and 7/64" allen key (included) to install screws. Made in USA.

Not compatible with all trim packages, please see compatibility photos.

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

1 Piece Billet 6061-T6 Aluminum Shift Knobs. Precision CNC machined in the USA. Durable anodized finishes. Exposed stainless steel or anodized aluminum socket head cap screws for a bold industrial look. Engraved logos will never wear off. Engineered to be ergonomic. Easy installation, simply thread onto factory shaft against jam nuts (included). 

Weight of gearshift knob is approximately 11.5oz (326g).

Compatibility:

• • 2005-2015 Tacoma with manual transmission.
  • 2016+ Tacoma with manual transmission - slightly more involved installation.
  • Older manual transmission Toyotas, inquire before ordering if concerned about fit.
  • M12 x 1.25 thread.
    
  AJT Design is not in any way sponsored by or affiliated with Toyota.

3 PACK INCLUDES 3 KNOBS

Replacement dial style climate control knobs for the 2005-2015 Tacoma. Injection molded of high strength and impact resistant ABS plastic. Socket head cap screws for rugged good looks. Clear indicator lights up the same color as OEM and provides tactile feedback. Assembly requires the metal clips to be removed from the OEM knobs and placed into the AJT knobs for a snug OEM like fit, pull off/press on. Assembly requires a small screwdriver (not included) to remove clip and 7/64" allen key (included) to install screws. Made in USA.

These knobs fit the 4x4 knob as well, though they do stick out some (see photos), the 4 PACK is required for the 4x4 knob is to be replaced as well. Includes knob(s) only, panel shown for reference.

These knobs fit the 4x4 knob on the 2007-2013 Tundra. (see the 1 PACK)

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

Oversize cup holder for the 2014-2021 Toyota Tundra. Also fits 2019+ Rav4. 3.8" inside diameter will fit several large beverage containers such as 32oz Nalgene, 36oz Yeti, 32oz Rtic, 32/40oz Hydroflask, etc. Large full length side cutout will accommodate most coffee cups. Friction fit, easily installed/removed. Two can fit at the same time. Injection molded of thick walled high strength and impact resistant ABS plastic.

AJT Design is not in any way sponsored by or affiliated with Toyota.

INCLUDES 4 TRIM RINGS

Replacement climate vent trim rings for the 2011-2018 Wrangler JK. Does not fit 2007-2010 JK, or 2018+ JL. Injection molded of high strength and impact resistant ABS plastic. Socket head cap screws for rugged good looks. Easy pull off/press on installation. Installation requires only a flat screwdriver (not included) and a 7/32" allen key (included). Factory center buttons are re-used. Made in USA.

Instruction video:

INCLUDES 4 TRIM RINGS

Replacement climate vent trim rings for the 2011-2018 Wrangler JK. Does not fit 2007-2010 JK, or 2018+ JL. Injection molded of high strength and impact resistant ABS plastic. Socket head cap screws for rugged good looks. Easy pull off/press on installation. Installation requires only a flat screwdriver (not included) and a 7/32" allen key (included). Factory center buttons are re-used. Made in USA.

Instruction video:

Transfer Case Knob only.

1 Piece Billet 6061-T6 Aluminum Shift Knobs. Precision CNC machined in the USA. Durable anodized finishes. Exposed stainless steel or anodized aluminum socket head cap screws for a bold industrial look. Engraved logos will never wear off. Engineered to be ergonomic. Easy installation, simply thread onto factory shaft against jam nuts (included).

Transfer case knob is engraved with H2-H4-N-L4 shift pattern.

Compatibility:

• 2007-2014 FJ Cruiser with automatic transmission.
• 2010+ 4Runner with transfer case knob.
  

AJT Design is not in any way sponsored by or affiliated with Toyota.

3 PACK INCLUDES 3 KNOBS

Replacement dial style climate control knobs for the 2014-2021 Tundra. Injection molded of high strength and impact resistant ABS plastic. Socket head cap screws for rugged good looks. Clear indicator lights up the same color as OEM and provides tactile feedback. Assembly requires removal of dash panels and careful removal of knobs. This is not difficult, but care must be taken to keep knobs properly indexed. Please watch the instruction video before installing. Assembly requires a flat and phillips screwdriver (not included) and 7/64" allen key (included) to install screws. Made in USA.

Not compatible with all trim packages, please see compatibility photos.

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

INCLUDES 3 KNOBS

Replacement dial style climate control knobs for the 2007+ FJ Cruiser. Injection molded of high strength and impact resistant ABS plastic. Socket head cap screws for rugged good looks. Clear indicator lights up the same color as OEM and provides tactile feedback. Assembly requires the metal clips to be removed from the OEM knobs and placed into the AJT knobs for a snug OEM like fit, pull off/press on. Assembly requires a small screwdriver or needle nose pliers, dental pick, etc (not included) to remove clip and 7/64" allen key (included) to install screws. Made in USA.

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video (shown for Tacoma, FJ install is the same):

4 PACK INCLUDES 4 KNOBS

Replacement dial style climate control knobs for the 2005-2015 Tacoma. Injection molded of high strength and impact resistant ABS plastic. Socket head cap screws for rugged good looks. Clear indicator lights up the same color as OEM and provides tactile feedback. Assembly requires the metal clips to be removed from the OEM knobs and placed into the AJT knobs for a snug OEM like fit, pull off/press on. Assembly requires a small screwdriver (not included) to remove clip and 7/64" allen key (included) to install screws. Made in USA.

These knobs fit the 4x4 knob as well, though they do stick out some (see photos), this 4 PACK includes enough pieces for the 4x4 knob is to be replaced as well. Includes knob(s) only, panel shown for reference.

These knobs fit the 4x4 knob on the 2007-2013 Tundra. (see the 1 PACK)

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

Oversize cup holder for the 2014-2021 Toyota Tundra. Also fits 2019+ Rav4. 3.8" inside diameter will fit several large beverage containers such as 32oz Nalgene, 36oz Yeti, 32oz Rtic, 32/40oz Hydroflask, etc. Large full length side cutout will accommodate most coffee cups. Friction fit, easily installed/removed. Two can fit at the same time. Injection molded of thick walled high strength and impact resistant ABS plastic.

AJT Design is not in any way sponsored by or affiliated with Toyota.

INCLUDES 3 KNOBS

Replacement dial style climate control knobs for the 2007+ FJ Cruiser. Injection molded of high strength and impact resistant ABS plastic. Socket head cap screws for rugged good looks. Clear indicator lights up the same color as OEM and provides tactile feedback. Assembly requires the metal clips to be removed from the OEM knobs and placed into the AJT knobs for a snug OEM like fit, pull off/press on. Assembly requires a small screwdriver or needle nose pliers, dental pick, etc (not included) to remove clip and 7/64" allen key (included) to install screws. Made in USA.

DO NOT USE THREADLOCKER SUCH AS LOCTITE ON THIS PRODUCT!

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video (shown for Tacoma, FJ install is the same):