1 Piece Billet 6061-T6 Aluminum Battery Clamp. Precision CNC machined in the USA. Durable anodized finishes. Easy installation, new mounting hardware - stainless nylock nuts and black nylon washers included. Re-uses existing J-bolts. Some applications may require longer J-bolts, these can be purchased at your local auto parts store. Fits several Toyota applications, up to 7" wide battery, 5/8" cross member fits stock and aftermarket batteries. 

AJT Design is not in any way sponsored by or affiliated with Toyota.

INCLUDES 2 KNOBS

Replacement radio knobs for the 2020-21 Tundra and 2020+ 4Runner. Injection molded of high strength and impact resistant ABS plastic. Lights up like the OEM knobs. Easy pull off/press on assembly, no tools required. Made in USA.

Only compatible with newer 2020 radio packages, please see compatibility photos. MAKE SURE TO REMOVE RADIO KNOB TO CHECK COMPATIBILITY.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Oversize replacement cup holder for the automatic only 2016-2023 Tacoma. Oversized cavities will accommodate containers up to 3.65" in diameter. Removable factory center piece will fit. Installation is easy though it requires the removal of the center console. With the console removed the factory cup holder is easily replaced by removing and reinstalling with the factory philips head screws. Injection molded of high strength and impact resistant ABS plastic.

Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction Video:

INCLUDES 4 TRIM RINGS

Climate vent trim rings covers for the 2014-2021 Tundra. Injection molded of high strength and impact resistant ABS plastic. Easy install, these simply cover the existing rings and attach with supplied VHB tape. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

Oversize replacement cup holder for the automatic only 2016-2023 Tacoma. Oversized cavities will accommodate containers up to 3.65" in diameter. Removable factory center piece will fit. Installation is easy though it requires the removal of the center console. With the console removed the factory cup holder is easily replaced by removing and reinstalling with the factory philips head screws. Injection molded of high strength and impact resistant ABS plastic.

Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction Video:

4x4 Knob:

Injection molded of high strength and impact resistant ABS plastic. Install is easy, though some dashboard disassembly is required. Factory module is taken apart with a small phillips screwdriver (not included), OEM knob is un-clipped with a small screwdriver (not included). New knob snaps in place like the OEM piece. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

TAKE CARE NOT TO LOSE SPRINGS OR SPACERS INSIDE 4X4 KNOB

INCLUDES 3 KNOBS

Replacement climate control rings for the 2011-2018 Wrangler JK. Does not fit 2007-2010 JK, or 2018+ JL. Injection molded of high strength and impact resistant ABS plastic. Clear indicator lights up the same color as OEM and provide tactile feedback Easy pull off/press on installation. Factory center buttons are re-used. Made in USA.

Instruction video:

Cup holder trim ring for the 2016-2023 Tacoma. Injection molded of high strength and impact resistant ABS plastic. Install is easy, factory ring is removed with pry tool, the new rings attach with supplied VHB tape. Made in USA. FITS AUTOMATIC TRANSMISSION ONLY.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

4x4 Knob:

Injection molded of high strength and impact resistant ABS plastic. Install is easy, though some dashboard disassembly is required. Factory module is taken apart with a small phillips screwdriver (not included), OEM knob is un-clipped with a small screwdriver (not included). New knob snaps in place like the OEM piece. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

TAKE CARE NOT TO LOSE SPRINGS OR SPACERS INSIDE 4X4 KNOB

Start Button Ring:

Injection molded of high strength and impact resistant ABS plastic. Install is easy, factory ring is removed with a small screwdriver (not included), the new ring snaps in place like the OEM piece. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

Not compatible with dual zone climate control.

INCLUDES 3 RINGS

Replacement trim rings for the 2016-2023 Tacoma climate knobs. Injection molded of high strength and impact resistant ABS plastic. Easy install, factory rings pop off with a small screwdriver, new rings snap in. Reuses factory indicator lens. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

2 PACK INCLUDES 2 KNOBS

Replacement dial style climate control knobs for the 2014-2021 Tundra with dual zone control such as - Limited, Platinum, 1794, 2020 TRD PRO. Injection molded of high strength and impact resistant ABS plastic. Assembly requires removal of dash panels and careful removal of knobs. This is not difficult, but care must be taken to keep knobs properly indexed. Please watch the instruction video before installing. Assembly requires a flat and phillips screwdriver (not included). Made in USA.

Not compatible with all trim packages, please see compatibility photos.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

Toyota emblem overlay chrome delete for 2012+ Tacoma, 2007+ Tundra, 2010+ 4Runner, 2007-2014 FJ Cruiser, 2013+ Rav4 steering wheels. May fit other applications with the same steering wheel, see compatibility photo(s). May cover emblems on other Toyota steering wheels but fit is not guaranteed. Adheres over existing chrome emblem with adhesive tape, no disassembly or removal or chrome emblem required, will not damage chrome emblem or steering wheel. Made of durable ABS plastic. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Due to a cease and desist issed by Toyota we are no longer able to sell the emblem overlays that feature the Toyota logo.

Use supplied alcohol swab to clean chrome emblem only, alcohol may remove the finish from the steering wheel.

4 PACK INCLUDES 4 KNOBS

Replacement dial style climate control knobs for the 2007-2013 Tundra LIMITED. Injection molded of high strength and impact resistant ABS plastic. Assembly requires removal of dash panels and careful removal of knobs. This is not difficult, but care must be taken to keep knobs properly indexed. Please watch the instruction video before installing. Assembly requires a flat and phillips screwdriver (not included). Made in USA.

Not compatible with all trim packages, please see compatibility photos.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

Includes 4 covers (2LH+2RH).

Interior door handle covers for the 2007-2021 Tundra and 2007-2014 FJ Cruiser. Injection molded of high strength and impact resistant ABS plastic. Secured with a snap fit and VHB adhesive tape.

Installation is easy. Simply slide on and apply pressure to secure the VHB adhesive tape.

Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

2 PACK INCLUDES 2 KNOBS

Replacement dial style climate control knobs for the 2014-2021 Tundra with dual zone control such as - Limited, Platinum, 1794, 2020 TRD PRO. Injection molded of high strength and impact resistant ABS plastic. Assembly requires removal of dash panels and careful removal of knobs. This is not difficult, but care must be taken to keep knobs properly indexed. Please watch the instruction video before installing. Assembly requires a flat and phillips screwdriver (not included). Made in USA.

Not compatible with all trim packages, please see compatibility photos.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

Includes 2 covers (1LH+1RH).

Interior door handle covers for the 2007+ Tundra and 2007-2014 FJ Cruiser. Injection molded of high strength and impact resistant ABS plastic. Secured with a snap fit and VHB adhesive tape.

Installation is easy. Simply slide on and apply pressure to secure the VHB adhesive tape.

Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

INCLUDES 2 INSERTS

Replacement cup holder inserts for the 2007+ FJ Cruiser. Fits automatic and manual models. Also fits 2010+ 4Runner. Injection molded of high strength and impact resistant ABS plastic. These hard plastic inserts fit tight in the cup holders and do not stick to large cups like the soft factory inserts. Fits up to the same size cup as the factory part, includes can ridge to locate a standard 12oz can. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

INCLUDES 2 KNOBS

Replacement radio knobs for the 2020+ Tundra and 2020+ 4Runner. Injection molded of high strength and impact resistant ABS plastic. Lights up like the OEM knobs. Easy pull off/press on assembly, no tools required. Made in USA.

Only compatible with newer 2020 radio packages, please see compatibility photos. MAKE SURE TO REMOVE RADIO KNOB TO CHECK COMPATIBILITY.

AJT Design is not in any way sponsored by or affiliated with Toyota.

4x4 Knob:

Injection molded of high strength and impact resistant ABS plastic. Install is easy, though some dashboard disassembly is required. Factory module is taken apart with a small phillips screwdriver (not included), OEM knob is un-clipped with a small screwdriver (not included). New knob snaps in place like the OEM piece. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

TAKE CARE NOT TO LOSE SPRINGS OR SPACERS INSIDE 4X4 KNOB