INCLUDES 3 TRIM RINGS AND ONE FLAT TRIM

Climate knob trim rings for the 2014-2021 Tundra, all trim levels. Includes 3 rings and one flat piece. 3 knob applications will discard the flat piece, 2 knob applications will discard the center ring.

Injection molded of high strength and impact resistant ABS plastic. Easy install, though some dash disassembly is required. These snap in like the OEM pieces. Completely replaces the chrome OEM pieces. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

INCLUDES 2 INSERTS

Replacement cup holder inserts for the 2007+ FJ Cruiser. Fits automatic and manual models. Also fits 2010+ 4Runner. Injection molded of high strength and impact resistant ABS plastic. These hard plastic inserts fit tight in the cup holders and do not stick to large cups like the soft factory inserts. Fits up to the same size cup as the factory part, includes can ridge to locate a standard 12oz can. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Oversize replacement cup holder for the automatic only 2016-2023 Tacoma. Oversized cavities will accommodate containers up to 3.65" in diameter. Removable factory center piece will fit. Installation is easy though it requires the removal of the center console. With the console removed the factory cup holder is easily replaced by removing and reinstalling with the factory philips head screws. Injection molded of high strength and impact resistant ABS plastic.

Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction Video:

INCLUDES 2 INSERTS

Replacement cup holder inserts for the 2007+ FJ Cruiser. Fits automatic and manual models. Also fits 2010+ 4Runner. Injection molded of high strength and impact resistant ABS plastic. These hard plastic inserts fit tight in the cup holders and do not stick to large cups like the soft factory inserts. Fits up to the same size cup as the factory part, includes can ridge to locate a standard 12oz can. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

INCLUDES 2 KNOBS

Replacement radio knobs for the 2020-21 Tundra and 2020+ 4Runner. Injection molded of high strength and impact resistant ABS plastic. Lights up like the OEM knobs. Easy pull off/press on assembly, no tools required. Made in USA.

Only compatible with newer 2020 radio packages, please see compatibility photos. MAKE SURE TO REMOVE RADIO KNOB TO CHECK COMPATIBILITY.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Oversize replacement cup holder for the automatic only 2016-2023 Tacoma. Oversized cavities will accommodate containers up to 3.65" in diameter. Removable factory center piece will fit. Installation is easy though it requires the removal of the center console. With the console removed the factory cup holder is easily replaced by removing and reinstalling with the factory philips head screws. Injection molded of high strength and impact resistant ABS plastic.

Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction Video:

Includes 4 covers (2LH+2RH).

Interior door handle covers for the 2016-2023 Tacoma. Injection molded of high strength and impact resistant ABS plastic. Secured with a snap fit.

Installation is easy, simply snap on.

Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

INCLUDES 2 KNOBS

Replacement radio knobs for the 2016-19 Tacoma. Injection molded of high strength and impact resistant ABS plastic. Easy pull off/press on assembly, no tools required. Made in USA.

Only compatible with specific radio units. Remove knob and carefully check compatibility photos before ordering!

AJT Design is not in any way sponsored by or affiliated with Toyota.

Compatible with dual zone climate control ONLY.

INCLUDES 3 RINGS

Replacement trim rings for the 2016-2023 Tacoma climate knobs. Injection molded of high strength and impact resistant ABS plastic. Easy install, factory rings pop off with a small screwdriver, new rings snap in. Reuses factory indicator lens. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

Shift Knob Trim Ring for the 2016-2023 Tacoma (automatic). Simply remove your factory shift knob and clip this piece on to cover the chrome. Easy install with no tools, fasteners or adhesive. Injection molded of high strength and impact resistant ABS plastic. Made in USA.

FITS AUTOMATIC TRANSMISSION ONLY. FITS FACTORY SHIFT KNOBS ONLY.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

Includes 2 covers (1LH+1RH).

Interior door handle covers for the 2016-2023 Tacoma. Injection molded of high strength and impact resistant ABS plastic. Secured with a snap fit.

Installation is easy, simply snap on.

Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

Includes 2 covers (1LH+1RH).

Interior door handle covers for the 2016-2023 Tacoma. Injection molded of high strength and impact resistant ABS plastic. Secured with a snap fit.

Installation is easy, simply snap on.

Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

Start Button Ring:

Injection molded of high strength and impact resistant ABS plastic. Install is easy, factory ring is removed with a small screwdriver (not included), the new ring snaps in place like the OEM piece. Made in USA.

4x4 Knob:

Injection molded of high strength and impact resistant ABS plastic. Install is easy, though some dashboard disassembly is required. Factory module is taken apart with a small phillips screwdriver (not included), OEM knob is un-clipped with a small screwdriver (not included). New knob snaps in place like the OEM piece. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

TAKE CARE NOT TO LOSE SPRINGS OR SPACERS INSIDE 4X4 KNOB

4 PACK INCLUDES 4 KNOBS

Replacement dial style climate control knobs for the 2007-2013 Tundra LIMITED. Injection molded of high strength and impact resistant ABS plastic. Assembly requires removal of dash panels and careful removal of knobs. This is not difficult, but care must be taken to keep knobs properly indexed. Please watch the instruction video before installing. Assembly requires a flat and phillips screwdriver (not included). Made in USA.

Not compatible with all trim packages, please see compatibility photos.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

INCLUDES 2 KNOBS

Replacement radio knobs for the 2016-19 Tacoma. Injection molded of high strength and impact resistant ABS plastic. Easy pull off/press on assembly, no tools required. Made in USA.

Only compatible with specific radio units. Remove knob and carefully check compatibility photos before ordering!

AJT Design is not in any way sponsored by or affiliated with Toyota.

Glovebox Tacoma Inlay for the 2016-2023 Tacoma. Injection molded of high strength and impact resistant ABS plastic, our design features a matte finish and crisp edges. Install is easy, though the glovebox area must be thoroughly cleaned. These pieces attach with pre applied VHB tape. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

INCLUDES 4 TRIM RINGS

Climate vent trim rings covers for the 2014-2021 Tundra. Injection molded of high strength and impact resistant ABS plastic. Easy install, these simply cover the existing rings and attach with supplied VHB tape. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

Includes 4 covers (2LH+2RH).

Interior door handle covers for the 2010+ 4Runner. Injection molded of high strength and impact resistant ABS plastic. Secured with a snap fit.

Installation is easy, simply snap on.

Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

1 Piece Billet 6061-T6 Aluminum Shift Knobs. Precision CNC machined in the USA. Durable anodized finish. Engineered to be ergonomic. Easy installation, simply thread onto factory shaft against jam nuts (included).

Transfer case knob is engraved with H2-H4-N-L4 shift pattern.

Compatibility:

• 2007-2014 FJ Cruiser with automatic transmission.
• 2010+ 4Runner with transfer case knob.
  

AJT Design is not in any way sponsored by or affiliated with Toyota.

INCLUDES 2 KNOBS

Replacement radio knobs for the 2016-19 Tacoma. Injection molded of high strength and impact resistant ABS plastic. Easy pull off/press on assembly, no tools required. Made in USA.

Only compatible with specific radio units. Remove knob and carefully check compatibility photos before ordering!

AJT Design is not in any way sponsored by or affiliated with Toyota.

Includes 2 covers (1LH+1RH).

Interior door handle covers for the 2007+ Tundra and 2007-2014 FJ Cruiser. Injection molded of high strength and impact resistant ABS plastic. Secured with a snap fit and VHB adhesive tape.

Installation is easy. Simply slide on and apply pressure to secure the VHB adhesive tape.

Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video: