Oversize replacement cup holder for the automatic only 2016-2023 Tacoma. Oversized cavities will accommodate containers up to 3.65" in diameter. Removable factory center piece will fit. Installation is easy though it requires the removal of the center console. With the console removed the factory cup holder is easily replaced by removing and reinstalling with the factory philips head screws. Injection molded of high strength and impact resistant ABS plastic.

Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction Video:

2 Piece Set (1LH+1RH).

2 piece steering wheel trim. Injection molded of high strength and impact resistant ABS plastic. Easy install, please read instruction document before ordering (see below). Replaces factory trim pieces, not a stick on cover. Compatible with several Toyota steering wheels (see compatibility photo).

Button inserts are sold separately for applications that do not utilize all 4 button controls.

Common applications:

• 2016-2023 Tacoma
• 2014-2021 Tundra
• 2014+ 4Runner

Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Installation requires pry tool, #2 phillips screwdriver, T30 torx bit and driver (not included). Also the negative battery terminal must be disconnected.

Instructions: Download PDF here

Includes 2 trays for the upper and lower parts on the center console for SR, SR5, Limited models. Does not fit Platinum, 1794, TRD PRO, Capstone models, all 2023+ Sequoia models.

Center Console Tray Liners the 2022 Tundra. Very sticky and flexible PP+E/P material, allows for storage of items without moving and rattling around. Factory/OEM styling to match the existing factory trays in the truck. Held in place with friction, these will generally stay while the console lid is opened without the need for adhesive backing.

Easy install, simply place them in. No tools required.

Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

INCLUDES 2 KNOBS

Replacement radio knobs for the 2020-21 Tundra and 2020+ 4Runner. Injection molded of high strength and impact resistant ABS plastic. Lights up like the OEM knobs. Easy pull off/press on assembly, no tools required. Made in USA.

Only compatible with newer 2020 radio packages, please see compatibility photos. MAKE SURE TO REMOVE RADIO KNOB TO CHECK COMPATIBILITY.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Compatible with dual zone climate control ONLY.

INCLUDES 3 RINGS

Replacement trim rings for the 2016-2023 Tacoma climate knobs. Injection molded of high strength and impact resistant ABS plastic. Easy install, factory rings pop off with a small screwdriver, new rings snap in. Reuses factory indicator lens. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

INCLUDES 2 KNOBS

Replacement radio knobs for the 2016-19 Tacoma. Injection molded of high strength and impact resistant ABS plastic. Easy pull off/press on assembly, no tools required. Made in USA.

Only compatible with specific radio units. Remove knob and carefully check compatibility photos before ordering!

AJT Design is not in any way sponsored by or affiliated with Toyota.

INCLUDES 2 KNOBS

Replacement radio knobs for the 5th Gen (2010+) 4Runner*.

*Not compatible with all radio packages, please see compatibility photos.

Injection molded of high strength and impact resistant ABS plastic. Easy pull off/press on assembly, no tools required. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Start Button Ring:

Injection molded of high strength and impact resistant ABS plastic. Install is easy, factory ring is removed with a small screwdriver (not included), the new ring snaps in place like the OEM piece. Made in USA.

4x4 Knob:

Injection molded of high strength and impact resistant ABS plastic. Install is easy, though some dashboard disassembly is required. Factory module is taken apart with a small phillips screwdriver (not included), OEM knob is un-clipped with a small screwdriver (not included). New knob snaps in place like the OEM piece. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

TAKE CARE NOT TO LOSE SPRINGS OR SPACERS INSIDE 4X4 KNOB

Shift Knob Trim Ring for the 2016-2023 Tacoma (automatic). Simply remove your factory shift knob and clip this piece on to cover the chrome. Easy install with no tools, fasteners or adhesive. Injection molded of high strength and impact resistant ABS plastic. Made in USA.

FITS AUTOMATIC TRANSMISSION ONLY. FITS FACTORY SHIFT KNOBS ONLY.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

INCLUDES 3 TRIM RINGS AND ONE FLAT TRIM

Climate knob trim rings for the 2014-2021 Tundra, all trim levels. Includes 3 rings and one flat piece. 3 knob applications will discard the flat piece, 2 knob applications will discard the center ring.

Injection molded of high strength and impact resistant ABS plastic. Easy install, though some dash disassembly is required. These snap in like the OEM pieces. Completely replaces the chrome OEM pieces. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

Shift Knob Trim Ring for the 2016-2023 Tacoma (automatic). Simply remove your factory shift knob and clip this piece on to cover the chrome. Easy install with no tools, fasteners or adhesive. Injection molded of high strength and impact resistant ABS plastic. Made in USA.

FITS AUTOMATIC TRANSMISSION ONLY. FITS FACTORY SHIFT KNOBS ONLY.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

Compatible with dual zone climate control ONLY.

INCLUDES 3 RINGS

Replacement trim rings for the 2016-2023 Tacoma climate knobs. Injection molded of high strength and impact resistant ABS plastic. Easy install, factory rings pop off with a small screwdriver, new rings snap in. Reuses factory indicator lens. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

Shift gate trim ring for the 2014-2021 Tundra with console shifter. Covers all the chrome. Injection molded of high strength and impact resistant ABS plastic.

Easy install, simply remove shift knob (twist off) and snap the trim ring in place. No tools required.

Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

Includes 2 covers (1LH+1RH).

Interior door handle covers for the 2016-2023 Tacoma. Injection molded of high strength and impact resistant ABS plastic. Secured with a snap fit.

Installation is easy, simply snap on.

Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

2 Piece Set (1LH+1RH).

2 piece steering wheel trim. Injection molded of high strength and impact resistant ABS plastic. Easy install, please read instruction document before ordering (see below). Replaces factory trim pieces, not a stick on cover. Compatible with several Toyota steering wheels (see compatibility photo).

Button inserts are sold separately for applications that do not utilize all 4 button controls. 

Common applications:

• 2016-2023 Tacoma
• 2014-2021 Tundra
• 2014+ 4Runner

Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Installation requires pry tool, #2 phillips screwdriver, T30 torx bit and driver (not included). Also the negative battery terminal must be disconnected.

Includes 1 tray for lower part only on the center console for Platinum, 1794, TRD PRO, Capstone models. All 2023+ Sequoia models.

Center Console Tray Liners the 2022 Tundra. Very sticky and flexible PP+E/P material, allows for storage of items without moving and rattling around. Factory/OEM styling to match the existing factory trays in the truck. Held in place with friction, these will generally stay while the console lid is opened without the need for adhesive backing.

Easy install, simply place them in. No tools required.

Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

4x4 Knob:

Injection molded of high strength and impact resistant ABS plastic. Install is easy, though some dashboard disassembly is required. Factory module is taken apart with a small phillips screwdriver (not included), OEM knob is un-clipped with a small screwdriver (not included). New knob snaps in place like the OEM piece. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

TAKE CARE NOT TO LOSE SPRINGS OR SPACERS INSIDE 4X4 KNOB

Includes 2 covers (1LH+1RH).

Interior door handle covers for the 2016-2023 Tacoma. Injection molded of high strength and impact resistant ABS plastic. Secured with a snap fit.

Installation is easy, simply snap on.

Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

INCLUDES 3 KNOBS

Replacement climate control rings for the 2011-2018 Wrangler JK. Does not fit 2007-2010 JK, or 2018+ JL. Injection molded of high strength and impact resistant ABS plastic. Clear indicator lights up the same color as OEM and provide tactile feedback Easy pull off/press on installation. Factory center buttons are re-used. Made in USA.

Instruction video:

Glovebox Tacoma Inlay for the 2016-2023 Tacoma. Injection molded of high strength and impact resistant ABS plastic, our design features a matte finish and crisp edges. Install is easy, though the glovebox area must be thoroughly cleaned. These pieces attach with pre applied VHB tape. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video: