Glovebox Tacoma Inlay for the 2016-2023 Tacoma. Injection molded of high strength and impact resistant ABS plastic, our design features a matte finish and crisp edges. Install is easy, though the glovebox area must be thoroughly cleaned. These pieces attach with pre applied VHB tape. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

Not compatible with dual zone climate control.

INCLUDES 3 RINGS

Replacement trim rings for the 2016-2023 Tacoma climate knobs. Injection molded of high strength and impact resistant ABS plastic. Easy install, factory rings pop off with a small screwdriver, new rings snap in. Reuses factory indicator lens. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

Includes 4 covers (2LH+2RH).

Interior door handle covers for the 2010+ 4Runner. Injection molded of high strength and impact resistant ABS plastic. Secured with a snap fit.

Installation is easy, simply snap on.

Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

Includes 4 covers (2LH+2RH).

Interior door handle covers for the 2007-2021 Tundra and 2007-2014 FJ Cruiser. Injection molded of high strength and impact resistant ABS plastic. Secured with a snap fit and VHB adhesive tape.

Installation is easy. Simply slide on and apply pressure to secure the VHB adhesive tape.

Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

2 Piece Set (1LH+1RH).

2 piece steering wheel trim. Injection molded of high strength and impact resistant ABS plastic. Easy install, please read instruction document before ordering (see below). Replaces factory trim pieces, not a stick on cover. Compatible with several Toyota steering wheels (see compatibility photo).

Button inserts are sold separately for applications that do not utilize all 4 button controls. 

Common applications:

• 2016-2023 Tacoma
• 2014-2021 Tundra
• 2014+ 4Runner

Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Installation requires pry tool, #2 phillips screwdriver, T30 torx bit and driver (not included). Also the negative battery terminal must be disconnected.

INCLUDES 4 TRIM RINGS

Climate vent trim rings covers for the 2016-2023 Tacoma. Injection molded of high strength and impact resistant ABS plastic. Install is easy, though some dashboard simple disassembly is required (see instruction video) and these attach with supplied VHB tape. Made in USA.

NOTE: ALL "OLD" VERSIONS HAVE BEEN DEPLETED,4 IDENTICAL RINGS WITH THE BIGGER FLANGE WILL BE SHIPPED

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

INCLUDES 4 TRIM RINGS

Climate vent trim rings covers for the 2014-2021 Tundra. Injection molded of high strength and impact resistant ABS plastic. Easy install, these simply cover the existing rings and attach with supplied VHB tape. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

INCLUDES 2 KNOBS

Replacement radio knobs for the 2020-2023 Tacoma. Injection molded of high strength and impact resistant ABS plastic. Lights up like the OEM knobs. Easy pull off/press on assembly, no tools required. Made in USA.

Only compatible with specific radio units. Remove knob and carefully check compatibility photos before ordering!

AJT Design is not in any way sponsored by or affiliated with Toyota.

Shift gate trim ring for the 2014-2021 Tundra with console shifter. Covers all the chrome. Injection molded of high strength and impact resistant ABS plastic.

Easy install, simply remove shift knob (twist off) and snap the trim ring in place. No tools required.

Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

INCLUDES 2 KNOBS

Replacement radio knobs for the 2014-2019 Tundra. Injection molded of high strength and impact resistant ABS plastic. Easy pull off/press on assembly, no tools required. Made in USA.

Not compatible with newer 2020 radio packages, please see compatibility photos.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Toyota emblem overlay chrome delete for 2012+ Tacoma, 2007+ Tundra, 2010+ 4Runner, 2007-2014 FJ Cruiser, 2013+ Rav4 steering wheels. May fit other applications with the same steering wheel, see compatibility photo(s). May cover emblems on other Toyota steering wheels but fit is not guaranteed. Adheres over existing chrome emblem with adhesive tape, no disassembly or removal or chrome emblem required, will not damage chrome emblem or steering wheel. Made of durable ABS plastic. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Due to a cease and desist issed by Toyota we are no longer able to sell the emblem overlays that feature the Toyota logo.

Use supplied alcohol swab to clean chrome emblem only, alcohol may remove the finish from the steering wheel.

Includes 2 covers (1LH+1RH).

Interior door handle covers for the 2007+ Tundra and 2007-2014 FJ Cruiser. Injection molded of high strength and impact resistant ABS plastic. Secured with a snap fit and VHB adhesive tape.

Installation is easy. Simply slide on and apply pressure to secure the VHB adhesive tape.

Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

Shift Knob Trim Ring for the 2016-2023 Tacoma (automatic). Simply remove your factory shift knob and clip this piece on to cover the chrome. Easy install with no tools, fasteners or adhesive. Injection molded of high strength and impact resistant ABS plastic. Made in USA.

FITS AUTOMATIC TRANSMISSION ONLY. FITS FACTORY SHIFT KNOBS ONLY.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

Includes 4 covers (2LH+2RH).

Interior door handle covers for the 2010+ 4Runner. Injection molded of high strength and impact resistant ABS plastic. Secured with a snap fit.

Installation is easy, simply snap on.

Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

INCLUDES 2 KNOBS

Replacement radio knobs for the 2020-2023 Tacoma. Injection molded of high strength and impact resistant ABS plastic. Lights up like the OEM knobs. Easy pull off/press on assembly, no tools required. Made in USA.

Only compatible with specific radio units. Remove knob and carefully check compatibility photos before ordering!

AJT Design is not in any way sponsored by or affiliated with Toyota.

Shift Knob Trim Ring for the 2016-2023 Tacoma (automatic). Simply remove your factory shift knob and clip this piece on to cover the chrome. Easy install with no tools, fasteners or adhesive. Injection molded of high strength and impact resistant ABS plastic. Made in USA.

FITS AUTOMATIC TRANSMISSION ONLY. FITS FACTORY SHIFT KNOBS ONLY.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

Glovebox Tacoma Inlay for the 2016-2023 Tacoma. Injection molded of high strength and impact resistant ABS plastic, our design features a matte finish and crisp edges. Install is easy, though the glovebox area must be thoroughly cleaned. These pieces attach with pre applied VHB tape. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

INCLUDES 3 TRIM RINGS AND ONE FLAT TRIM

Climate knob trim rings for the 2014-2021 Tundra, all trim levels. Includes 3 rings and one flat piece. 3 knob applications will discard the flat piece, 2 knob applications will discard the center ring.

Injection molded of high strength and impact resistant ABS plastic. Easy install, though some dash disassembly is required. These snap in like the OEM pieces. Completely replaces the chrome OEM pieces. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

INCLUDES 2 INSERTS

Replacement cup holder inserts for the 2007+ FJ Cruiser. Fits automatic and manual models. Also fits 2010+ 4Runner. Injection molded of high strength and impact resistant ABS plastic. These hard plastic inserts fit tight in the cup holders and do not stick to large cups like the soft factory inserts. Fits up to the same size cup as the factory part, includes can ridge to locate a standard 12oz can. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Includes 2 covers (1LH+1RH).

Interior door handle covers for the 2007+ Tundra and 2007-2014 FJ Cruiser. Injection molded of high strength and impact resistant ABS plastic. Secured with a snap fit and VHB adhesive tape.

Installation is easy. Simply slide on and apply pressure to secure the VHB adhesive tape.

Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

Start Button Ring:

Injection molded of high strength and impact resistant ABS plastic. Install is easy, factory ring is removed with a small screwdriver (not included), the new ring snaps in place like the OEM piece. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

INCLUDES 2 KNOBS

Replacement radio knobs for the 2020-2023 Tacoma. Injection molded of high strength and impact resistant ABS plastic. Lights up like the OEM knobs. Easy pull off/press on assembly, no tools required. Made in USA.

Only compatible with specific radio units. Remove knob and carefully check compatibility photos before ordering!

AJT Design is not in any way sponsored by or affiliated with Toyota.

Shift gate trim ring for the 2014-2021 Tundra with console shifter. Covers all the chrome. Injection molded of high strength and impact resistant ABS plastic.

Easy install, simply remove shift knob (twist off) and snap the trim ring in place. No tools required.

Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video:

Compatible with dual zone climate control ONLY.

INCLUDES 3 RINGS

Replacement trim rings for the 2016-2023 Tacoma climate knobs. Injection molded of high strength and impact resistant ABS plastic. Easy install, factory rings pop off with a small screwdriver, new rings snap in. Reuses factory indicator lens. Made in USA.

AJT Design is not in any way sponsored by or affiliated with Toyota.

Instruction video: