This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

Features

• Provides roughly double the output of factory halogen fog lamps, greatly improving visibility in poor weather.

• Custom optic produces a sharp, asymmetric beam pattern with approximately a 100-degree spread for very wide coverage.

• Distinctive integrated amber backlight fully illuminates the lens as a stylish accent.

• Road-legal fog light that meets SAE F3 standards when properly installed and aimed.

• Plug-and-play main beam connection requires no permanent modification to factory wiring.

• Engineered and assembled in the USA for quality and consistency.

Performance overview

The Elite Series Fog Lamps are the first OE-style fog housings from this line that are built from the ground up for true performance rather than just appearance. They use a patent-pending optic, multi-die automotive emitters, and high-power full-copper circuit boards to achieve up to about five times the output of typical halogen fog lamps, giving a substantial real-world improvement in bad weather. This design still packages into an OE-style housing that fits factory locations for an easy upgrade.

Beam pattern and legality

The custom-engineered optic creates an extremely wide, asymmetric beam that reaches about 100 degrees across, much wider than most aftermarket fogs, while maintaining a very smooth pattern. There is a sharp cutoff to control glare to oncoming traffic and a slight color flicker at the very top edge of the beam, similar to high-end OEM optics, and the pattern is engineered to meet SAE F3 fog light standards for legal on-road use when aimed correctly. You should always follow local laws and regulations regarding fog lamp use, aiming, and installation.

Backlight functionality

Every Elite Series Fog Lamp includes an integrated amber backlight that acts as an accent or marker light. This backlight fully illuminates the main lens in amber and can be wired to any constant 12-volt source using the included tap connector, so you can tie it into parking lights, DRLs, or another circuit according to your preference. For compliance, the system is designed so that the backlight automatically turns off when the main fog beam is activated, and local regulations should be checked for acceptable use cases.

• Provides double the output compared to factory halogen fog light
• Sharp asymmetric beam pattern achieves 100-degree total spread
• Sharp asymmetric beam pattern achieves 100-degree total spread
• Plug and play main beam no modification needed
• Plug and play main beam no modification needed
• Road-legal fog light (SAE F3 compliant)
• Distinctive integrated amber backlight

Features: Advanced TIR optics provide high efficiency and focus. SAE-compliant, road-legal output. Includes round bezel for a factory-style appearance. Plug-and-play installation with no modification needed. Durable powder-coated aluminum extrusion. Engineered and assembled in the USA.

Overview: Upgrade your fog lights with the SS3 Type FT Fog Light Bracket Kit. Featuring higher output intensity than any other 3 in. light on the market, these LED pods are designed for maximum functionality, using custom-engineered TIR optics to produce highly effective beam patterns in a durable package. With the included round bezel, the SS3 Fog Kit delivers a clean, factory-style appearance with significantly increased brightness.

Plug and play: Thanks to custom-molded brackets, the SS3 Fog Light Bracket Kit can be installed in just a few minutes. Simply remove your factory fog light assembly and bolt the SS3 kit into place. Wire adapters are included, allowing you to connect the lights directly to your factory bulb sockets with no additional wiring required.

Backlight functionality: The Stage Series 3 in. LED pod is available with a distinctive amber backlight. The SS3’s backlight fully illuminates the TIR optic, providing a modern, uniform accent light instead of relying on small indicator LEDs.

SAE compliant: When installed as a pair and aimed in accordance with your state’s regulations, the Driving White pattern meets the SAE J581 standard for driving/auxiliary high beam lights, and the fog pattern meets the SAE J583 standard for legal on-road fog lamps.

• Advanced TIR optics provide high efficiency and focus
• Durable powdercoated aluminum construction
• High-intensity automotive-type LEDs
• Integrated Deutsch-style connector
• Pin-fin heatsink design

Features: Bolt-on fitment compatible with Ford F‑150 (2021+). Allows you to mount two Stage Series LED pods above the hood. Utilizes existing mounting points and hardware for simple installation. Thick-gauge stainless steel construction. Low-profile design.

Overview: The Stage Series LED Ditch Light Kit compatible with Ford F‑150 (2021+) allows you to easily mount two SS3 or SSC2 pods above the hood. These application-specific brackets are CAD-designed to install using factory mounting points, so no cutting or drilling is required. The low-profile design minimizes glare and does not interfere with raising or lowering the hood.

Built to last: The brackets are constructed from thick-gauge stainless steel. Unlike options made from mild steel, these brackets resist corrosion over time, and their robust construction helps eliminate vibration or bouncing while driving.

Proven reliability: Stage Series LED lighting has been extensively tested for long-term operation from −40 to 185 degrees Fahrenheit, as well as for vibration, moisture intrusion, and corrosion, to meet SAE-style testing standards. They have also been proven in real-world use by racers and enthusiasts.

Experience: With over a decade in the automotive LED lighting industry, Diode Dynamics engineers and assembles its products in the United States. This in-house design and manufacturing focus helps ensure high quality, strong performance, and access to the latest LED technology across a wide range of vehicle applications.

Installation Instructions

• Allows you to mount your Stage Series LED Pods directly to your vehicle
• Highly durable powdercoated steel construction
• Allows you to mount your Stage Series&nbsp
• LED Pods directly to your vehicle

Features: Allows installation of C1R LED pods into the trailer hitch. Provides a high-power reverse light and red accent light. Simple 5-minute installation with no need for custom wiring or routing. Optional SafetyStrobe brake light strobing. Designed and assembled in the USA.

Overview: Add significantly more light output when backing up at night with the Stage Series HitchMount Reverse Light Kit. This kit allows you to mount one C1R LED pod in your 2-inch or 2.5-inch trailer hitch receiver, adding a high-power reverse light, an additional running light, and an optional fourth brake light. With the included wiring harness, it connects directly to your vehicle’s factory trailer hitch wiring for simple, everyday operation.

Brighter backup: Factory reverse bulbs often do not provide enough light for confident nighttime backing. By pairing patented TIR optics with high-powered LEDs, the C1R in this kit delivers an additional reverse light that is several times brighter than stock bulbs and automatically turns on when the vehicle is put in reverse.

Simple installation: The patent-pending snap-fit design lets you install the mount in minutes without drilling or using a hitch pin. Simply insert the HitchMount into your trailer hitch receiver, and the snap-fit side mounts lock into place, making installation quick and straightforward.

Focused optics: Traditional optics like reflectors or simple lenses lose light internally and create glare, so not all of the light reaches the target. The custom-engineered TIR optic in the Stage Series pods collects all of the light from the LED and directs it only where you need it, significantly reducing glare and improving overall efficiency.

• Allows you to mount an C1R LED pod in any 2-inch or 2.5-inch trailer hitch receiver
• Adds reverse light 4th brake light and additional running light
• C1R LED pod in any 2-inch or 2.5-inch trailer hitch receiver
• Designed and assembled in USA
• Simple 5-minute installation
• Allows you to mount an&nbsp
• Optional SafetyStrobe

Features: Allows installation of SSC1 LED pods into the trailer hitch. Provides a high-power reverse light and red accent light. Simple 5-minute installation with no need for custom wiring or routing. Optional SafetyStrobe brake light strobing. Designed and assembled in the USA.

Overview: Add significantly more light output when backing up at night with the Stage Series HitchMount Reverse Light Kit. This kit lets you mount one SSC1 LED pod in your 2-inch or 2.5-inch trailer hitch receiver, adding a high-power reverse light and an additional running light. With the included wiring harness, it connects directly to your vehicle’s factory trailer hitch wiring for simple, everyday operation.

Brighter backup: Factory reverse bulbs often do not provide enough light for confident nighttime backing. By pairing patented TIR optics with high-powered LEDs, the SSC1 in this kit delivers an additional reverse light that is several times brighter than stock bulbs and automatically activates when the vehicle is put in reverse.

Simple installation: The patent-pending snap-fit design allows you to install the mount in minutes without drilling or using a hitch pin. Simply insert the HitchMount into your trailer hitch receiver, and the snap-fit side mounts lock into place, making installation quick and straightforward.

Focused optics: Traditional optics like reflectors or simple lenses lose light internally and create glare, so not all of the light reaches the target. The custom-engineered TIR optic in the Stage Series pods collects all of the light from the LED and directs it only where you need it, significantly reducing glare and improving overall efficiency.

• Allows you to mount an SSC1 LED pod in any 2-inch or 2.5-inch trailer hitch receiver
• Adds reverse light 4th brake light and additional running light
• Designed and assembled in USA
• Simple 5-minute installation
• Optional SafetyStrobe

Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.

• 46mm monotube design ensures consistent, fade-free performance in all conditions
• Patented digressive valving instantly reacts to changing surface conditions
• Vehicle specific tuning
• Made In The USA

This Part Fits:

Uncompromised performance through FOX’s patented internal bypass technology delivers the feel of near-endless suspension travel. Exclusive internal bypass technology allows oil to flow around the piston at some points of the stroke – while creating humongous pressure at other points – supporting the vehicle like no other product can.Floating through terrain is accomplished with FOX’s ride zone – combining a race-developed shock piston, internal bypass and Dual Speed Compression adjustment – allowing fine tuning for weight, terrain and speed.Dominate any terrain with the brute strength of 3- and 2.5-inch aluminum bodies, cactus cooler reservoirs and 7/8” shafts with redundant seals, all proven in the harshest of environments under the toughest of conditions.

• Performance Tuned For Vehicle Specific Application
• Black Anodized CNC Machined Aluminum Components
• External Reservoir System Dissipates Heat Fast
• Durable Zinc Plated Seamless Alloy Body

This Part Fits:

Uncompromised performance through FOX’s patented internal bypass technology delivers the feel of near-endless suspension travel. Exclusive internal bypass technology allows oil to flow around the piston at some points of the stroke – while creating humongous pressure at other points – supporting the vehicle like no other product can.Floating through terrain is accomplished with FOX’s ride zone – combining a race-developed shock piston, internal bypass and Dual Speed Compression adjustment – allowing fine tuning for weight, terrain and speed.Dominate any terrain with the brute strength of 3- and 2.5-inch aluminum bodies, cactus cooler reservoirs and 7/8” shafts with redundant seals, all proven in the harshest of environments under the toughest of conditions.

• Performance Tuned For Vehicle Specific Application
• Black Anodized CNC Machined Aluminum Components
• External Reservoir System Dissipates Heat Fast
• Durable Zinc Plated Seamless Alloy Body

This Part Fits:

Uncompromised performance through FOX’s patented internal bypass technology delivers the feel of near-endless suspension travel. Exclusive internal bypass technology allows oil to flow around the piston at some points of the stroke – while creating humongous pressure at other points – supporting the vehicle like no other product can.Floating through terrain is accomplished with FOX’s ride zone – combining a race-developed shock piston, internal bypass and Dual Speed Compression adjustment – allowing fine tuning for weight, terrain and speed.Dominate any terrain with the brute strength of 3- and 2.5-inch aluminum bodies, cactus cooler reservoirs and 7/8” shafts with redundant seals, all proven in the harshest of environments under the toughest of conditions.

• Performance Tuned For Vehicle Specific Application
• Redundant Sealing System/Long Lasting Performance
• 100% Serviceable And Tunable For Longer Lifespan
• Industry-Leading 17-4 H900 Stainless Steel Shaft
• ORB O-Ring Port Fittings Deliver A Superior Seal
• Packed With 35 Years Of Race Winning Technology
• Black Anodized CNC Machined Aluminum Components
• External Reservoir System Dissipates Heat Fast
• Teflon-Lined Heat-Treated Spherical Bearings
• Durable Zinc Plated Seamless Alloy Body

This Part Fits: