This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

Features

• Provides roughly double the output of factory halogen fog lamps, greatly improving visibility in poor weather.

• Custom optic produces a sharp, asymmetric beam pattern with approximately a 100-degree spread for very wide coverage.

• Distinctive integrated amber backlight fully illuminates the lens as a stylish accent.

• Road-legal fog light that meets SAE F3 standards when properly installed and aimed.

• Plug-and-play main beam connection requires no permanent modification to factory wiring.

• Engineered and assembled in the USA for quality and consistency.

Performance overview

The Elite Series Fog Lamps are the first OE-style fog housings from this line that are built from the ground up for true performance rather than just appearance. They use a patent-pending optic, multi-die automotive emitters, and high-power full-copper circuit boards to achieve up to about five times the output of typical halogen fog lamps, giving a substantial real-world improvement in bad weather. This design still packages into an OE-style housing that fits factory locations for an easy upgrade.

Beam pattern and legality

The custom-engineered optic creates an extremely wide, asymmetric beam that reaches about 100 degrees across, much wider than most aftermarket fogs, while maintaining a very smooth pattern. There is a sharp cutoff to control glare to oncoming traffic and a slight color flicker at the very top edge of the beam, similar to high-end OEM optics, and the pattern is engineered to meet SAE F3 fog light standards for legal on-road use when aimed correctly. You should always follow local laws and regulations regarding fog lamp use, aiming, and installation.

Backlight functionality

Every Elite Series Fog Lamp includes an integrated amber backlight that acts as an accent or marker light. This backlight fully illuminates the main lens in amber and can be wired to any constant 12-volt source using the included tap connector, so you can tie it into parking lights, DRLs, or another circuit according to your preference. For compliance, the system is designed so that the backlight automatically turns off when the main fog beam is activated, and local regulations should be checked for acceptable use cases.

• Provides double the output compared to factory halogen fog light
• Sharp asymmetric beam pattern achieves 100-degree total spread
• Sharp asymmetric beam pattern achieves 100-degree total spread
• Plug and play main beam no modification needed
• Plug and play main beam no modification needed
• Road-legal fog light (SAE F3 compliant)
• Distinctive integrated amber backlight

Features: Advanced TIR optics provide high efficiency and focus. SAE-compliant, road-legal output. Includes round bezel for a factory-style appearance. Plug-and-play installation with no modification needed. Durable powder-coated aluminum extrusion. Engineered and assembled in the USA.

Overview: Upgrade your fog lights with the SS3 Type FT Fog Light Bracket Kit. Featuring higher output intensity than any other 3 in. light on the market, these LED pods are designed for maximum functionality, using custom-engineered TIR optics to produce highly effective beam patterns in a durable package. With the included round bezel, the SS3 Fog Kit delivers a clean, factory-style appearance with significantly increased brightness.

Plug and play: Thanks to custom-molded brackets, the SS3 Fog Light Bracket Kit can be installed in just a few minutes. Simply remove your factory fog light assembly and bolt the SS3 kit into place. Wire adapters are included, allowing you to connect the lights directly to your factory bulb sockets with no additional wiring required.

Backlight functionality: The Stage Series 3 in. LED pod is available with a distinctive amber backlight. The SS3’s backlight fully illuminates the TIR optic, providing a modern, uniform accent light instead of relying on small indicator LEDs.

SAE compliant: When installed as a pair and aimed in accordance with your state’s regulations, the Driving White pattern meets the SAE J581 standard for driving/auxiliary high beam lights, and the fog pattern meets the SAE J583 standard for legal on-road fog lamps.

• Advanced TIR optics provide high efficiency and focus
• Durable powdercoated aluminum construction
• High-intensity automotive-type LEDs
• Integrated Deutsch-style connector
• Pin-fin heatsink design

Features: Bolt-on fitment compatible with Ford F‑150 (2021+). Allows you to mount two Stage Series LED pods above the hood. Utilizes existing mounting points and hardware for simple installation. Thick-gauge stainless steel construction. Low-profile design.

Overview: The Stage Series LED Ditch Light Kit compatible with Ford F‑150 (2021+) allows you to easily mount two SS3 or SSC2 pods above the hood. These application-specific brackets are CAD-designed to install using factory mounting points, so no cutting or drilling is required. The low-profile design minimizes glare and does not interfere with raising or lowering the hood.

Built to last: The brackets are constructed from thick-gauge stainless steel. Unlike options made from mild steel, these brackets resist corrosion over time, and their robust construction helps eliminate vibration or bouncing while driving.

Proven reliability: Stage Series LED lighting has been extensively tested for long-term operation from −40 to 185 degrees Fahrenheit, as well as for vibration, moisture intrusion, and corrosion, to meet SAE-style testing standards. They have also been proven in real-world use by racers and enthusiasts.

Experience: With over a decade in the automotive LED lighting industry, Diode Dynamics engineers and assembles its products in the United States. This in-house design and manufacturing focus helps ensure high quality, strong performance, and access to the latest LED technology across a wide range of vehicle applications.

Installation Instructions

• Allows you to mount your Stage Series LED Pods directly to your vehicle
• Highly durable powdercoated steel construction
• Allows you to mount your Stage Series&nbsp
• LED Pods directly to your vehicle

Features: Allows installation of C1R LED pods into the trailer hitch. Provides a high-power reverse light and red accent light. Simple 5-minute installation with no need for custom wiring or routing. Optional SafetyStrobe brake light strobing. Designed and assembled in the USA.

Overview: Add significantly more light output when backing up at night with the Stage Series HitchMount Reverse Light Kit. This kit allows you to mount one C1R LED pod in your 2-inch or 2.5-inch trailer hitch receiver, adding a high-power reverse light, an additional running light, and an optional fourth brake light. With the included wiring harness, it connects directly to your vehicle’s factory trailer hitch wiring for simple, everyday operation.

Brighter backup: Factory reverse bulbs often do not provide enough light for confident nighttime backing. By pairing patented TIR optics with high-powered LEDs, the C1R in this kit delivers an additional reverse light that is several times brighter than stock bulbs and automatically turns on when the vehicle is put in reverse.

Simple installation: The patent-pending snap-fit design lets you install the mount in minutes without drilling or using a hitch pin. Simply insert the HitchMount into your trailer hitch receiver, and the snap-fit side mounts lock into place, making installation quick and straightforward.

Focused optics: Traditional optics like reflectors or simple lenses lose light internally and create glare, so not all of the light reaches the target. The custom-engineered TIR optic in the Stage Series pods collects all of the light from the LED and directs it only where you need it, significantly reducing glare and improving overall efficiency.

• Allows you to mount an C1R LED pod in any 2-inch or 2.5-inch trailer hitch receiver
• Adds reverse light 4th brake light and additional running light
• C1R LED pod in any 2-inch or 2.5-inch trailer hitch receiver
• Designed and assembled in USA
• Simple 5-minute installation
• Allows you to mount an&nbsp
• Optional SafetyStrobe

Features: Allows installation of SSC1 LED pods into the trailer hitch. Provides a high-power reverse light and red accent light. Simple 5-minute installation with no need for custom wiring or routing. Optional SafetyStrobe brake light strobing. Designed and assembled in the USA.

Overview: Add significantly more light output when backing up at night with the Stage Series HitchMount Reverse Light Kit. This kit lets you mount one SSC1 LED pod in your 2-inch or 2.5-inch trailer hitch receiver, adding a high-power reverse light and an additional running light. With the included wiring harness, it connects directly to your vehicle’s factory trailer hitch wiring for simple, everyday operation.

Brighter backup: Factory reverse bulbs often do not provide enough light for confident nighttime backing. By pairing patented TIR optics with high-powered LEDs, the SSC1 in this kit delivers an additional reverse light that is several times brighter than stock bulbs and automatically activates when the vehicle is put in reverse.

Simple installation: The patent-pending snap-fit design allows you to install the mount in minutes without drilling or using a hitch pin. Simply insert the HitchMount into your trailer hitch receiver, and the snap-fit side mounts lock into place, making installation quick and straightforward.

Focused optics: Traditional optics like reflectors or simple lenses lose light internally and create glare, so not all of the light reaches the target. The custom-engineered TIR optic in the Stage Series pods collects all of the light from the LED and directs it only where you need it, significantly reducing glare and improving overall efficiency.

• Allows you to mount an SSC1 LED pod in any 2-inch or 2.5-inch trailer hitch receiver
• Adds reverse light 4th brake light and additional running light
• Designed and assembled in USA
• Simple 5-minute installation
• Optional SafetyStrobe

Features: High-performance OEM-grade replacement. Custom-engineered optic provides extremely wide, intense light output. Distinctive integrated amber backlight. Road-legal fog light (SAE F3 compliant). Plug-and-play main beam with no modification needed. Engineered and assembled in the USA.

Overview: Introducing the Elite Series Fog Lamps, the first OE-style fog lights designed for true performance. With a custom-engineered, patent-pending optic, multi-die automotive emitters, and high-power full-copper circuit boards, the Elite Series fog light delivers up to five times more output than halogen lamps. With plug-and-play installation, this is one of the easiest and most effective upgrades you can make to improve visibility in inclement weather.

Output that outperforms: The Elite Series Fog Lamp optic produces a light pattern that is wider than other aftermarket fog lamps, with an 80-degree spread of highly intense light. Even with this extremely wide band of light, the pattern remains very smooth, with a sharp cutoff to avoid glare for other drivers and a BMW-style “color flicker” at the very edge of the pattern. All of this performance is achieved while still meeting SAE F3 fog light standards for legal on-road use; please check your local laws and regulations for aiming, installation, and applicability.

Backlight functionality: All Elite Series Fog Lamps come standard with an integrated amber accent light. This backlight feature fully illuminates the main lens with amber LEDs and can be wired to any constant 12-volt source for your preferred vehicle function using the included tap connector. The backlight will automatically shut off when the main beam is activated; be sure to check local laws and regulations for acceptable use.

• Custom-engineered optic provides extremely wide intense light output
• Plug and play main beam no modification needed
• Road-legal fog light (SAE F3 compliant)
• High-performance OEM-grade replacement
• Distinctive amber backlight

Features: Bolt-on fitment compatible with Ford Bronco (2021+) with steel bumper. Adds SAE-compliant fog lights and powerful off-road lighting. Harnesses included for independent control of road-legal and off-road lighting. Backlight feature provides amber accent light. Highly durable powder-coated stainless steel bracket. Engineered and assembled in the USA.

Overview: The Stage Series Fog Pocket Kit, compatible with Ford Bronco (2021+), allows you to mount two SS3 LED pods and four SSC2 LED pods in the factory bumper openings. This kit adds serious functionality to your Bronco with both road-legal fog lights and powerful off-road lighting. It includes application-specific brackets that are CAD-designed to install using factory mounting points, with no cutting or drilling required.

Lighting for every situation: This kit includes two SS3 LED pods in a fog beam pattern and four SSC2 LED pods in a combo beam pattern. This combination provides versatile lighting options for both on-road and off-road use. All lights utilize high-intensity LED emitters and TIR optics for exceptional focus and overall output.

Separate switches: With the included harnesses, the two SS3 pods and four SSC2 pods can be controlled independently, allowing you to switch between road-legal fog lights and off-road lighting. The SS3 fog pods operate like factory fog lights, automatically activating when switched on and when your headlights are on. The off-road lights can be controlled using factory auxiliary switches or the included 3-way toggle switch.

SAE compliant: When installed as a pair and aimed according to your state’s regulations, the fog beam pattern meets SAE J583 standards for legal on-road use.

Installation Instructions

• Advanced TIR optics provide high efficiency and focus
• Durable powdercoated aluminum construction
• High-intensity automotive-type LEDs
• Integrated Deutsch-style connector
• Pin-fin heatsink design

Features: Advanced TIR optics provide high efficiency and focus. SAE-compliant, road-legal output. Includes round bezel for a factory-style appearance. Plug-and-play installation with no modification needed. Durable powder-coated aluminum extrusion. Engineered and assembled in the USA.

Overview: Upgrade your fog lights with the SS3 Type A Fog Light Bracket Kit. Featuring higher output intensity than any other 3 in. light on the market, these LED pods are designed for maximum functionality, with custom-engineered TIR optics producing highly effective beam patterns in a durable package. With the included round bezel, the SS3 Fog Kit offers a clean, factory-style appearance with significantly improved brightness.

Plug and play: Thanks to custom-molded brackets, the SS3 Fog Light Bracket Kit can be installed in minutes. Simply remove your factory fog light assembly, and this kit will bolt directly into place. Wire adapters are included, allowing you to connect the lights to your factory bulb sockets with no additional wiring required.

Backlight functionality: The Stage Series 3 in. LED pod is available with a distinctive amber backlight. The SS3’s backlight fully illuminates the TIR optic, providing a more modern and unique appearance compared to traditional indicator LEDs.

SAE compliant: When installed as a pair and aimed in accordance with your state’s regulations, the Driving White pattern meets the SAE J581 standard for driving and auxiliary high beam lights, and the fog pattern meets the SAE J583 standard for legal on-road fog light use.

Installation Instructions

• Advanced TIR optics provide high efficiency and focus
• Durable powdercoated aluminum construction
• High-intensity automotive-type LEDs
• Integrated Deutsch-style connector
• Pin-fin heatsink design

Features: Advanced TIR optics provide high efficiency and focus. SAE-compliant, road-legal output. Includes round bezel for a factory-style appearance. Plug-and-play installation with no modification needed. Durable powder-coated aluminum extrusion. Engineered and assembled in the USA.

Overview: Upgrade your fog lights with the SS3 Type A Fog Light Bracket Kit. Featuring higher output intensity than any other 3 in. light on the market, these LED pods are designed for maximum functionality, with custom-engineered TIR optics producing highly effective beam patterns in a durable package. With the included round bezel, the SS3 Fog Kit offers a clean, factory-style appearance with significantly improved brightness.

Plug and play: Thanks to custom-molded brackets, the SS3 Fog Light Bracket Kit can be installed in minutes. Simply remove your factory fog light assembly, and this kit will bolt directly into place. Wire adapters are included, allowing you to connect the lights to your factory bulb sockets with no additional wiring required.

Backlight functionality: The Stage Series 3 in. LED pod is available with a distinctive amber backlight. The SS3’s backlight fully illuminates the TIR optic, providing a more modern and unique appearance compared to traditional indicator LEDs.

SAE compliant: When installed as a pair and aimed in accordance with your state’s regulations, the Driving White pattern meets the SAE J581 standard for driving/auxiliary high beam lights, and the fog pattern meets the SAE J583 standard for legal on-road fog light use.

Installation Instructions

• Advanced TIR optics provide high efficiency and focus
• Durable powdercoated aluminum construction
• High-intensity automotive-type LEDs
• Integrated Deutsch-style connector
• Pin-fin heatsink design