Do you have an EU or GCC Spec Jeep Wrangler JL and want to install a set of ORACLE Lighting Jeep Wrangler JL Flush Mount Tail Lights but are concerned about losing your required Amber Turn Signal? These dual-function LED modules solve exactly that problem.

The reverse light retains its full brightness for white reverse illumination, while also adding a bright Amber switchback effect for turn signals — replacing the red taillight section flash with a proper amber indicator. Installation is straightforward: remove the original modules, install the new ones using the existing hardware, and connect to the existing connector with one added pin to the original plug.

Designed specifically for EU or GCC Spec Jeeps, but US Spec JL owners can also take advantage of these modules for off-road amber chase lighting by wiring the amber trigger wires to a switch.

• Plug & Play design — uses existing hardware and connector
• 10 high-powered LEDs per module for bright reverse illumination
• Bright Amber Switchback Effect for compliant rear turn signals
• Dual function — White reverse light + Amber turn signal in one module
• EU & GCC Spec compatible — meets amber rear indicator requirements
• US Spec compatible for off-road amber chase lighting use
• 1-Year Warranty

It’s common to see red rear indicator lights on the road in the US on old and new vehicles alike. Most European vehicles sold in the US, such as BMW, use Amber turn signals because in many European countries, Amber signals are required on both the front and rear of the vehicle as turn indicators.

While both Red and Amber rear turn signals are compliant options in the US, many believe Amber lights offer a more distinct contrast between red brake lights and amber turn signals — improving visibility and safety.

By offering these modules with Amber-capable rear turn signals, the ORACLE Flush Tail Lights can now meet compliance criteria in countries such as Europe, South America, and the Middle East where a rear Amber indicator light is required.

Compatible with the following vehicles equipped with ORACLE Flush Mount LED Tail Lights:

• 2018–2026 Jeep Wrangler JL (EU Spec)
• 2018–2026 Jeep Wrangler JL (GCC Spec)
• 2018–2026 Jeep Wrangler JL (US Spec — off-road amber use only)

• (2) Dual Function Amber/White Reverse LED Modules
• Hardware for installation using existing connector

Installation is straightforward and plug-and-play:

1. Remove the original LED modules from your ORACLE Flush Mount Tail Lights
2. Install the new dual-function modules using the existing hardware
3. Connect to the existing connector — add the included pin to the original plug
4. For US Spec Jeeps: wire the amber trigger wires to a toggle switch for off-road chase lighting

ORACLE’s integrated windshield roof light bar offers a smarter alternative to traditional external light bars by blending directly into the factory roof line of JL and JT hardtop models. The patented molded cowling creates a clean factory-style look while delivering serious lighting performance.

The system combines 30 high-power emitters, advanced reflector-facing LED technology, and built-in amber or white clearance lights to create a highly functional, highly refined lighting upgrade for Jeep owners who want performance without sacrificing appearance.

Compared to traditional roof bars, the integrated design also helps reduce wind noise and aerodynamic drag for a quieter and more refined highway driving experience.

• Factory-Look Integration: Patented molded cowling blends into the roof line for an OEM-style appearance
• Quieter & More Aerodynamic: Helps reduce wind noise and drag compared to traditional external light bars
• Advanced Reflector Technology: 30 individual 8W emitters maximize output and projection distance
• Paint-Ready Housing: Ships matte black and can be professionally painted to match your hardtop color
• Selectable Clearance Lights: Built-in amber or white clearance lights can be wired to Aux switches, parking lights, or DRL
• Built to Last: IP68 waterproofing, thermal management, and voltage protection help ensure reliable long-term use

• Patented Integrated Design for a factory-look roofline
• 30 × 8W LED Emitters with reflector-facing technology
• Dual-Color Clearance Lights with selectable amber or white function
• Aerodynamic & Quiet compared to traditional external bars
• Paint-Ready Housing for custom color matching
• IP68 Waterproof Rating for harsh weather exposure
• Electronic Thermal Management to help prevent overheating
• Voltage Protection against under / over voltage and reverse polarity
• Premium Materials including aluminum housing and Lexan lens
• Designed & Engineered in USA
• 50,000+ Hour LED Lifespan
• 1-Year Warranty backed by ORACLE Lighting

• Integrated LED Light Bar Assembly with Molded Cowling
• Polycarbonate Housing (Matte Black, Paint-Ready)
• Complete Wiring Harness with IP68 Connectors
• Mounting Hardware & Threaded Inserts
• Lightbar-Compatible Windshield Wipers
• Installation Tool for Threaded Inserts
• Detailed Installation Instructions
• 1-Year Manufacturer Warranty

• No Aux Switches? Add the Switched Wiring Harness for easy plug-and-play installation.
• Have Factory Aux Switches? Use the Factory Aux Wiring Harness to integrate with your existing switches.
• Replacement Windshield Wipers: Specially designed Wiper Blade Replacements are available for JL/JT vehicles using the rooftop light bar.

If you have a painted hardtop, it is recommended to have the housing professionally painted before installation for the best color match.

ORACLE Lighting's LED Off-Road Side Mirrors integrate high-powered LED light bars directly into factory-style mirrors for the Jeep Wrangler JL and Jeep Gladiator JT. The result is a clean, OEM-look upgrade that delivers serious peripheral illumination exactly where you need it on the trail.

The custom LED system features 24 total 1W Cree LEDs producing approximately 2,200–2,250 lumens with a purpose-built 45° beam angle to maximize side-trail visibility during night runs and desert driving.

• 24x 1W Cree LEDs — premium binned emitters for consistent output
• 2,200 lumens total light output
• 45° beam angle — optimized for peripheral trail coverage
• Advanced LED optics for focused side illumination
• 6000K color temperature — crisp, daylight-white output
• 2 Amp power draw — efficient and easy on your electrical system
• Multiple aluminum heat sinks — radiator-style airflow cooling
• Factory-style OEM appearance — no external brackets or clutter
• Patented design — USD1005197S1
• 2-Year Warranty

• 2018–2026 Jeep Wrangler JL
• 2020–2026 Jeep Gladiator JT

• (2) LED Off-Road Side Mirrors for Jeep Wrangler JL / Gladiator JT

Featuring advanced LED projection with 5,200 lumens of high-quality illumination, these heated headlights improve visibility in all weather conditions while drawing less power than factory lamps.

Snow and ice buildup can block vital light output in frigid conditions, reducing visibility and increasing risk. The heated Oculus™ system is designed to help prevent lens accumulation when it matters most, while still delivering the performance and beam control expected from the Oculus™ platform.

• 100% plug-and-play with no additional wiring required for the heating element
• Automatically activates when the headlight is on and ambient temperature approaches freezing
• Amber status LED illuminates when heating is active
• Integrated temperature sensors regulate heat for peak performance
• Automatically cycles on and off to maintain optimal lens temperature

• Precision LED projector for optimized beam distribution and beam angle
• Plug & Play into the factory connector with no relays or extra harnesses required
• No additional wiring needed for the heater function
• Halo DRL with 200+ bright white LEDs for vivid daytime impact
• Complete headlight replacement for improved focus vs. bulb-only upgrades
• Includes tool for easy beam angle adjustability, ideal for lifted Jeeps

Light focus is critical for both your safety and the safety of other drivers on the road. On lifted vehicles, glare can obstruct the vision of oncoming traffic if the beam is not properly controlled.

Oculus™ headlights use a sharp cut-off line and precision-focused beam pattern to help avoid glare issues while delivering strong usable output.

Proper thermal management is essential for high-performance LED reliability. Oculus™ uses both active and passive cooling methods to sustain low LED temperatures for performance and longevity.

Remote-mounted heat sinks and an internal cooling fan work together to manage heat effectively and support long-term durability.

1. Park the Jeep 25 ft away from a wall on a flat surface.
2. Measure from the ground to the center of each headlight.
3. Mark the same height on the wall with tape.
4. Locate the adjuster bolt on the back of the headlight under the rubber cap.
5. Aim the cutoff line to meet the marked spot using the supplied tool.

See the Sidetrack™ system and lighting functions in action:

The Sidetrack™ LED Lighting System features a pair of injection-molded inserts that fit perfectly in the original body lines and contour the factory fender vent for a seamless, OEM-quality look. The matte black panels provide an aggressive appearance while delivering practical lighting benefits.

Installation requires no modification to the fender sheetmetal—the cladding applies with included VHB adhesive for a secure, long-lasting bond.

Entry Light Feature: High-output white LEDs illuminate the area outside the vehicle to help identify puddles, potholes, and hazards when entering/exiting at night. Connects to the vehicle’s dome light circuit—activates on unlock/door open and can be turned on with the factory control knob.

Turn Indicator Feature: Adds a bright amber side indicator to improve lane-change awareness and safety on JL/JT models that lack a clear side indicator—especially helpful on lifted vehicles where blind spots are increased.

• 2018–2025 Jeep Wrangler JL (all trims)
• 2020–2025 Jeep Gladiator JT (all trims)

• (2) Sidetrack™ LED Modules (RH/LH)
• Wiring connector terminals
• VHB adhesive (pre-applied)
• Installation instructions
• 1 Year Warranty

Installation Tips:

• Install is possible without rivet removal; however, removing rivets makes installation easier.
• If you remove the rivets as shown in the video, we suggest having replacements on hand: MOPAR Part # 6506007AA.
• If installing on Gladiator Sport, the rubber grommet may appear slightly different than the video. Installation process remains the same.
• Approximate installation time: 1 hour

The ORACLE Smoked Lens LED Third Brake Light is a direct replacement for the factory high-mount 3rd brake light on the 2018–2025 Jeep Wrangler JL. Featuring bright red LEDs behind a dark tinted PMMA lens, this upgrade delivers a more aggressive, blacked-out aesthetic while maintaining full brake light functionality — no error codes, no modifications.

Installation takes just 5 minutes: remove the original light (2 screws), plug the ORACLE unit into the factory cable connector, and you’re done. Compatible with both the standard spare tire mount and spare tire delete / relocation setups.

• Smoked PMMA Lens: Dark tinted lens for an aggressive, blacked-out look
• Bright Red LEDs: High-output LEDs — a significant upgrade over the factory halogen
• Direct Plug & Play: Connects directly to the factory cable connector — no wiring modification
• No Error Codes: Communicates correctly with the factory system — no warning messages
• Spare Tire & Delete Compatible: Works with the standard spare tire mount and spare tire delete / relocation setups
• 5-Minute Install: Remove 2 screws, swap the light, plug in — done
• Direct OEM Replacement: Fits the factory high-mount 3rd brake light location exactly

• (1) ORACLE Jeep Wrangler JL Smoked Lens LED Third Brake Light
• 1-Year Warranty

Remove the factory 3rd brake light using 2 screws. Plug the ORACLE unit directly into the factory cable connector — no wiring modification required. Compatible with both spare tire and spare tire delete / relocation configurations. Total install time is approximately 5 minutes.

Introducing the Oculus™ Bi-LED Headlamp System by ORACLE Lighting, now with an additional Switchback Amber Turn Signal Halo. This system delivers 5,200 lumens of high-quality LED projection for improved driver visibility in all weather conditions while drawing less power than factory lamps.

These headlamps are a complete replacement solution—not just a bulb upgrade—providing stronger light focus, improved beam control, and a plug-and-play installation that connects directly to the factory harness.

The package also includes a beam aiming tool to help properly focus the light output, which is especially important on lifted Jeeps.

• Complete headlight replacement with better light focus than a simple bulb upgrade
• Enhanced visibility with increased and focused LED light output
• Switchback function provides both white halo DRL and amber LED turn signal functionality
• Plug-and-play wiring harness connects directly to the factory connector
• Includes beam aiming tool for proper light focus on lifted Jeeps

• Precision LED projector for optimum light distribution and beam angle
• Installs using original mounting hardware
• Plug-and-play headlight wiring with no additional relays or harnesses required
• LED halo includes over 200 bright white LEDs for DRL function
• LED halo also includes over 200 bright amber LEDs for turn signal functionality
• White halo activates through factory parking lights
• Amber turn signal integrates with factory turn signal wiring using the included plug-and-play adapter

Safety

Light focus is critical not only for driver safety, but also for the safety of other drivers on the road. This is especially important on lifted vehicles, where the light source sits higher and can interfere with the field of vision of oncoming traffic.

Oculus headlights are engineered with a very sharp cut-off line and focused beam pattern to help avoid glare while maximizing usable road illumination.

Reliability

Proper thermal management is essential for long-term LED performance. Oculus uses both active and passive cooling methods to keep LED temperatures controlled.

Remote-mounted heat sinks and an internal cooling fan work together to help ensure proper temperature control and LED longevity.

• (2) Oculus™ Switchback Bi-LED Projector Headlights for Jeep Wrangler JL / Gladiator JT

Aim Your Oculus Bi-LED Headlights in 5 Simple Steps

1. Park the Jeep 25 ft. away from a wall on a flat surface.
2. Measure from the ground to the center of each headlight.
3. Mark the same height on the wall with tape.
4. Locate the adjuster bolt on the back of the headlight covered by a rubber cap.
5. Aim the cutoff line to meet the marked spot on the wall using the supplied tool.